Identificador: 354
Abierta
ID de articulo : # 354 se ha agregado a su lista de deseos.
Descripción
PARTE: 3YH-YFC-14 – SIERRA TRONZADORA – 5 HP – SIERRA 14” – AMX MACHINERY
MAQUINA EN FOTO: IZQUIERDA
OPCIONAL: DERECHA
SPECIFICATIONS
Cutting capacity (Thickness x Width)：1" x 10", 2" x 9", 3" x 8"
Cycle speed：95 cuts/min
Cycle operation：Pneumatic
Saw blade diameter (Option)：ø14"
Saw arbor diameter：ø1"/ 30mm
Saw blade speed ：4100 rpm
Dust exhaust diameter：ø4" x (1)
Saw arbor motor：5HP / 7.5HP
Table size：630X 590mm
Net weight：240 kgs
Gross weight：290 kgs
Packing dimensions(LxWxH)：770x 760x 1300mm
FEATURES
Table surface is precision ground, assuring cutting accuracy.
The sawblade on the left side is standard machine, shown as picture. (Option, the sawbalde on the right side)
Cycle speed is adjustable and up to 95 strokes per minute.
Motion cycle is pneumatic operated and controlled by foot switch. (Option, dual hand buttons)
Powerful 5HP (7.5HP) motor drive.
T-clamp is easily adjusted for workpiece thickness variation.
Convenient and fast sawblade replacement.
Proper dust collection design to keep cabinet clean.
Roller Conveyor (Option)
Standard length is 1M. Available in any length.
Outfeed roller conveyor is with extension stop and aluminum extruded rear fence.
Extension Stop (Option)
Extension stop is used on outfeed roller conveyor. It is convenient for length stop and for repetitive cutting in a mass production line.
There are 3 kinds of extension stop, fix stop, flip stop and lift stop.
Safety Switch (Option)
When operator approaches the cutting area, the safety switch controls T-clamp and unable to cut workpiece.
Safety Guard (Option)
The complete safety for fast cutting operation and to avoid operator to approach the cutting area.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROS
PARTE:
2PG-SC2 - HORNO PARA CERAMICA, VIDRIO, METALES – 5.95 LITROSNUEVO CON GARANTIAIdeal for Teachers“I have traveled with my SC-2 for 11 years. I sometimes have to use welding gloves to put the warm kiln on a cart, take it outside, load it in the car, and wrap it in a wool blanket.“I have traveled out of state with my SC-2 repeatedly. Fired it over and over again in class, burned up all manner of skewers, toothpicks, cork clay and more. The kiln can take it! While I'm sure the kiln wou...
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – HOMAG WEEKE ABD 100
PARTE: 12063 – CNC TALADRO, ENGOMA, INSERTA – HOMAG WEEKE ABD 100USADA – MUY BUENAS CONDICIONESMODELO: 2010Weeke’s model ABD 100 is designed for small and large capacity horizontal drilling, gluing, and dowel insertion. The ABD 100 is produced by skilled technicians with a long tradition for excellence in engineering and machine building.The Model ABD 100 is built on a heavy-duty base with welded steel construction. The main horizontal beam of the machine holds the carriage for the...
AMXmachinery
SIERRA VERTICAL 50 X 96
PARTE # 2SS-C4 – SIERRA VERTICAL – MOTOR 3 ¼ HP – CAP. 50” ALTO X 96” LARGO – 1 ¾ “ espesorNUEVA CON GARANTIACORTE VERTICAL: 50"CORTE HORIZONTAL: 96"ESPESOR CORTE: 1-3/4"DIAMETRO SIERRA: 8"MOTOR: 15 AMP, 120V, 220VLARGO DEL MARCO: 60"DATOS DE ENVIOPESO: 189 LBSDIMENSIONES: 60 X 11 X 70 PULGADAS
AMXmachinery
SIERRA VERTICAL ELCON CON NAVAJA
PARTE: 4EL-LANCET - SIERRA VERTICAL - CON NAVAJA - ELCONHow to improve/speed up the processing of multiwall polycarbonate sheets?By using a static knife instead of a sawblade. This reduces the amount of time spent on cleaning out the channels. The static knife delivers precise and clean cuts, without chips. Thus reducing wasting time on the post-processing. Some of the companies owning a Lancet reported up to 75% time saved.The Elcon Lancet is another #custombuilt solution that very few people...