Identificador: 1796
Abierta
ID de articulo : # 1796 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-MRS175 - SIERRA MULTIPLE - 18"
FEATURES
- Specially designed auxillary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist wood
- Massive cast iron base provides incredible absorption characteristics for high quality deep cutting operations
- Precision chain and rails (dip chain) system facilitates straight line cutting
- Equipped with a blade mist cooling device providing cooling and cleaning for sawblades during cutting increasing blade life and improved cut quality
- Powerful blade drive motor for heavy duty cutting operations
- Motorized saw arbor and thickness adjustment for operator convenience
- A digitally controlled lubrication unit to provide consistent oil protection to the feed chain and guide rails. If the oil level drops below a safe level a warning lamp will light up and the feed chain will stop automatically
- Equipped with an electronic amperage display which is tied in to an overload protection where if the saw motor exceeds a rated amperage the feed chain slows down automatically
- Variable feed speed adjustment by frequency inverter from the front of the machine
|
Max. cutting thickness |
6.9″ (175mm) |
|
Max.
cutting width |
13.78″ (350mm) |
|
Distance of fixed inside blade to column |
14.9″ (380mm) |
|
Min. working length |
27.5″ (700mm) |
|
Max. sawblade diameter |
18″ (450mm) |
|
Min. sawblade diameter |
14″ (355mm) |
|
Sawblade bore |
70mm or 90mm dble. keyed |
|
Saw arbor diameter |
70mm
(w/o sleeve) |
|
Saw arbor motor |
125 HP (150HP optional) |
|
Saw arbor elevation motor |
1/2 HP |
|
Feed motor |
3 HP (5HP optional) |
|
Variable feed speed |
8-80
FPM(2.5-24m/min) |
|
Powered raise and lower of roller group |
1/2 HP |
|
Dust hood diameter |
8″ (200mm) |
|
Table height (pass line) |
29.3″ (745mm) |
|
Electrics – to UL/CSA standards |
230/460 or 575/3/60 |
|
Table area (L x W) |
72.4″ x 31.1″ |
|
Overall
dimensions |
95.5″ x 90.5″ x 63″ |
|
Net weight |
6600 lbs (3000 kgs) |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES RECTOS
PARTE: 4ST-FAST 500 MATRIX - SIERRA OPTIMIZADORA - CORTES RECTOSAUTOMATIC HIGH SPEED CROSSCUT SAW WITH ELECTRONIC PUSH-FEEDMATRIX, A STROMAB PHILOSOPHY Is a crosscut saw electronically pusher-controlled with complete optimisation and defection of wood.An optimal solution for all requirements in 90° up-cutting, it can work with either single bar and stack.Thanks to its specific cutting unit, it can perform a cutting cycle in 2 seconds and in relation to the cutting listcan produce up to 40% mor...
-500x500.png)
AMXmachinery1
ARMADORA DE PUERTAS - 3 X 6 PIES
PARTE: 2RI-R450V - ARMADORA DE PUERTASIs designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assem...
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA ANCHA - 52" ANCHO - 30 HP
PARTE: 2EX-XS-1E52 - LIJADORA DE BANDA ANCHA - 52" ANCHO - 30 HPExcess Series wide belt sanders use a 60″ belt. Theses machines have the same quality construction as our larger machines, but are affordable enough for even the smaller manufacturers. Truly an “excessive” amount of features for sander in its class.60″ belt lengthMono-block construction increases durabilityDual display digital thickness controllerOmron electronic eye sanding belt trackingWye-delta soft startRegal variable s...
AMXmachinery1
TALADRO MULTIPLE - 32 MM - 21 CABEZALES
PARTE: 2CK-JB21P - TALADRO MULTIPLE - 32 MM - 21 CABEZALESIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The p...