Identificador: 2809
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2SS-C5 - SIERRA VERTICAL - 74" ALTO X 64" ANCHO
The portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. Photos are shown with a stand and wheels, which are optional accessories.
Motor Horsepower, Amperage and Volts
- 3.25 HP, 15 amp, 120 Volt
- 3.25 HP, 7.5 amp, 220 Volt
Standard Equipment
- Zinc plated 1 ¾” steel guide tubes.
- Milwaukee Tool motor
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- TUV certified to UL/CSA standards
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ENLAZADORA DE CAJONES - MANUAL
PARTE: 2CK-JDT65 - ENLAZADORA DE CAJONES - MANUAL Produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity. The operator controls the dovetail unit by following a simple template allowing for ease of operation and quality joints. Equipped with a choice of four pitch templates for varying types of dovetail joints.Ideal for drawer production and furniture parts which require high ...
AMXmachinery1
SIERRA OPTIMIZADORA - AUTOMATICA
PARTE: 2CK-CFS100 - SIERRA OPTIMIZADORA - AUTOMATICAIs the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 1...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - FILTRO ABIERTO - REACONDICIONADA
PARTE: 2LE-460 IRD 20 - COLECTOR DE POLVOS - FILTRO ABIERTO - REACONDICIONADADonaldson model 460 IRD 20 open filter dust collector system - motor on fan 20 HP 230/460 volts - CFM rating 7000 - inlet size 17" - duct fitting from fan to collector - starter switch not includedOEM adapter kit available from Donaldson for barrel material storageConditionVery goodModel #460 IRD 20
AMXmachinery1
ALIMENTADOR - 4 RUEDAS
PARTE: 2CK-AF48Can be adapted easily to your shaper, table saw, and many other wooodworking machines.FEATURESNo. of rollers: 4No. of feed speeds: 8Feed speeds: 6.5/13/18/22/36/43/55/108 FPMRollers size: 4.73″ x 2.36″ (120mm x 60mm)Roller suspension: 0.71″ (18mm)Motor: 1 HPFeed direction: Forward/Reverse460/3/60 electrics