Identificador: 1142
Abierta
Descripción
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGE
PARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGE
PARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGE
PARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TALADRO MULTIPLE VERTICAL
PARTE: 2MK-LBM13 – TALADRO MULTIPLE VERTICAL – 13 TALADROSProvide features that offer a longer life, such as the Lubricated Aluminum Head (versus a sheet metal head) and Heat treated Steel Gears (versus plastic gears). With a 1 HP motor (versus standard 3/4 HP in most models) and Stainless Steel Spindles (versus steel spindles), these boring machines offer carpenters and woodworkers the opportunity to work with the most innovative bench top boring machine currently on the market!Specificatio...
AMXmachinery
ENCHAPADORA DE CANTOS
PARTE # 11895 – ENCHAPADORA DE CANTOS – BIESSE ERGHO 6EN BUENAS CONDICIONESOPERADA POR MEDIO DE PLC GRUPOS:RECTIFICADORENCOLADORRETESTADORRIBETEADORREDONDEADOR DE ESQUINASALISADOR DE CAMPORASCADOR DE PEGAMENTOABRILLANTADOR. CABINA DE PROTECCIONCAPACIDAD CHAPACINTA: DE .45 A 3 MM DE ESPESOR MARCA: ARTECH BIESSEMODELO: ERGHO 6AÑO: 2004MEDIDAS MAQUINA: ANCHO 6.40 M X FONDO 1.20 M X ALTO 1.43 MCONSUMO ELECTRICO: 220 VACFASES: 3 (TRIFASICO)KW: 15.9HZ: 60KW: 15.9HZ: 60VELOCIDAD DE SUCCION: 30M...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CATENALLI (2) MAQUINAS
PARTE: 12202 – ESPIGADORA DOBLE DE CADENA - CATENALLI (2) MAQUINASUSADA - EN BUENAS CONDICIONESLinea de moldurado tanto longitudinal como de cabezasTongue
and Groove line, makes heads and longitudinal ways to manufacture engineer or
solid wood flooringBrand Catenalli380
voltsMaquina longitudinal:Max
width working boards 300mm , Min wide 80mm.2
motors per each side 7.5 HP each oneMaquina transversal:Max length working boards 2450mm , Min Length 300mm.3
motors of each side , 7.5 HP each o...
AMXmachinery
PARTE: 12535 - BASTONERA – HAWKER
PARTE: 12535 - BASTONERA
– HAWKER
USADA – BUENAS CONDICIONES
2” diámetro máximo