ID: 1142
Open
Description
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGE
PARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGE
PARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGE
PARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12136 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE: 12136 - PRENSA DE TABLEROS – 20 SECCIONES –
TAYLOR
USADA – MUY BUENAS CONDICIONES
Desmantelada y lista para envío
(1) 8.5' Clamp frame
(6) Section
(20) clamps per section
3-1/2" jaws with 36"
clamping length
Pneumatic rotation by air
control power feed
Model: 8.5-6
Year of Manufacture: 2005
230V, 60 cycle, 3 phase
Shipping Footprint: 10
(length) x 8 (width) x 8 (height)
AMXmachinery
BRIQUETEADORA - ENTRADA 55” X 55” X 37” - REDONDO 60 MM
PARTE: 2WE-TH614 - BRIQUETEADORA - ENTRADA 55” X 55” X
37” - REDONDO 60 MM
NUEVA CON GARANTIA
Capacidad: 150-180 lbs/hr
-
Hopper Dimensions: 55.1 x 55.1" x 37" (1,400 x 1,400 x 950 mm)
-
Hopper Configuration: 4 Sides straight
-
Hopper Volume: 2.4 yds³ (1.85 m³)
-
Hydraulic Motor: 12 hp (9 kW)
-
Hydraulic Oil Volume: 42.3 gal (160 liters)
-
Briquette Diameter: 2" (50 mm)
-
Weight: App 2,645 lbs (1,200 kg)
*
Image may not depict actual equipment...
AMXmachinery
RESACADORA SENCILLA – 60” CAPACIDAD LARGO
PARTE: 2FA-NXL-48 – RESACADORA SENCILLA
– 60” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 800 RESAQUES/HRStandard FeaturesCutter Head is Never ExposedTable Moves w/Dual Air Rams Á Linear BearingsDouble Clamp System Machine SpecsDimensionsLength: 60"Width: 90"Height: 50"Table Height: 37" Power20 HP Electric Motor: 208/230/480/3/60 TEFCCompletely pre-wired motor starter with start/stop
buttons and circuit overload protection SpecificationsArbor & Bearing Size: 2"Approx. 2000 lbsTabl...
AMXmachinery
PARTE: 2GB - CUCHILLAS CORRUGADA PARA MOLDURADORAS - TRAMOS 6" LARGO
PARTE: 2GB - CUCHILLAS CORRUGADA PARA MOLDURADORAS, CEPILLOS, CANTEADORAS - TRAMOS 6" LARGOTramos 6” largo x 2.5” ancho x 5/16” espesor - HSS10 piezas en existencia aproximadamentePara hacer las molduras para molduradora o cepillos