ID: 3045
Open
.PNG)
Description
PARTE: 2LE-005 - SISTEMA DE ENTRADA PARA SIERRAS MULTIPLES - ALIMENTADOR
Is a low-cost solution to feeding boards into your fixed or movable saw blade ripsaw.
A powered movable fence on the infeed allows you to position the board exactly where you want to rip it. This reduces the edging size.
Stock is manually placed on the infeed roll case. After a fence position has been selected the operator releases the piece and it is automatically fed into the ripsaw.
The infeed table can run stock that is down to 14” long. Consult with the saw manufacture for saw capabilities.
The infeed roll case has a variable speed controller.
The infeed table can handle both surfaced and rough stock.
(4) top hold down rolls assists the feeding of the ripsaw, with the first roll pneumatically sequencing.
The infeed rolls are canted which keeps the boards positively against the fence.
Work Piece Dimensions ( 8’ Standard version )
Length: 14” Min. (consult ripsaw manufacture) 100” Max (optional 12’ and 16’ table length)
Width : ¾” Min. 12” Max.
Thickness: 3/8” Min. 3” Max.
Feed speeds: 20- 150 FPM (Ripsaw)
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
ESPIGADORA HAUNCHING
PARTE: 2PI-MTH - ESPIGADORA HAUNCHINGIs a multi-function, multi-axis Horizontal Machining Center designed to machine many of the components of Kitchen Cabinets all in one machine.Efficiency – haunch, mortise, and tenon all on one machineSpeed – increased cabinet door production
-500x500.png)
AMXmachinery1
SIERRA DE PANELES MANUAL
PARTE: 3HO-HT400 - SIERRA DE PANELES MANUALSliding table saw for longitudinal, transverse and angular cutting of panel materials (MDF, fibreboard, chipboard and glued panels) faced and laminated, as well as blanks made of solid wood, with preliminary trimming of the lower edge to prevent chipping.Table Size(L*W)3200*385mm(table size is optional)Main Blade Diameter400mmScoring Blade Diameter120mmRip Guide Length1650mmRip Cut Capacity1390mmSupport Arm Length1335mmCross Cut Capacity3200mmCross Cu...
-500x500.jpg)
AMXmachinery1
ASTILLADORA - 26 PULGADAS
PARTE: 2LO-WG-2630 - ASTILLADORA - 26 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cobs, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...
AMXmachinery1
COLECTOR DE POLVOS MODULAR - 20 HP
PARTE: 2EX- DC-3200S - COLECTOR DE POLVOS MODULAR - 20 HPIs powered by a 20 horsepower motor and comes equipped with 4 1-micron filter bags. It features a 132 square foot filter area with 48 cubic feet of storage capacity measuring 112 inches tall by 156 inches wide by 50 inches deep. This three-phase dust collector has 37 amps at 220 volts with 1725 RPM on a 26 inch fan. Modular ring design enables increased storage and filter capacity. Magnetic starter included.