ID: 2893
Open
.PNG)
Description
PARTE: 2RI-R113 - TALADRO LINEAL - 13 HUSILLOSTechnical Data and Specifications:
Is the entry level model in the line drills RITTER has to offer. Is both affordable and built to last. The R113 is a multi-spindle drill used for adjustable shelving. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with indexing pins on both the left and right hand side of the machine. The rear fence is adjustable allowing you to set your row offset from the edge.
Standard Features:
- 13-Spindle Gear Driven Drill Head on 32mm Centers
- (7) Right Hand, (6) Left Hand
- 60" Back Fence with (4) Adjustable Material Stops
- Right and Left Hand Work Stations
- (2) Spring Loaded Index Pins
- (2) Spring Operated Material Clamps
- Manually Actuated Boring Cycle
- Spring Return Up Stroke
- Tooling Not Included
Technical Data and Specifications:
- Drive Motor: 0.75 HP
- Spindle Centers: 32mm
- Collet Size: 10mm
- Throat Capacity: 8"
- Maximum Material Thickness: 1.25"
- Electrical: 110V, 1Ø, 60Hz, 15A
- Air: N/A
- Work height: 33.25″
- Footprint: 38″ x 60″
- Table Area: 20″ x 48″
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
ARMADORA DE BASTIDORES - HUSILLO DOBLE
PARTE: 2RI-R220T - ARMADORA DE BASTIDORES - HUSILLO DOBLEStandard Features:1.5 HP Spindle Drive Motor, TEFCFoot Actuated Boring Cycle14 Degree Double Spindle6,100 RPM Spindle Speed24" x 30" Table AreaAdjustable Fence with (2) StopsTooling IncludedTechnical Data and Specifications:Electrical: 110/120V, 60Hz, 20AAir: 2 CFM at 80 – 100 PSIWork Height: 38.25"Footprint: 34.5" x 25.25"
AMXmachinery1
CEPILLO 2 CARAS 40"
CEPILLO 2 CARAS 40" 2CK-GTM1020WHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly automatically move in place. This wide plane...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 3/16''
DOBLADORA DE METAL 4' X 3/16'' PARTE: 2GM-04316EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is power...
AMXmachinery1
DOBLADORA DE METAL 5' X 12GA
DOBLADORA DE METAL 5' X 12GA PARTE: 2GM-0512EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...