Identificador: 2588
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 26 X 80'' PARTE: 2GM-2680
26” x 80”, 4-1/8” bore, 10HP
ISO 9001 certified- Large spindle bore 4-1/8”
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 16”
- Heavy Duty main motor 10HP
- 4-Way Rapid Traverse
- 16 spindle speeds from 25-1,600 rpm, 16 speeds
- 54 kinds of inch threads, and 54 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- SINO DRO + Glass Scales
- Carriage Stop
- 12” 3-jaw chuck with top reversible jaws, direct mount
- 16” 4-jaw chuck, direct mount
- 18” Face plate
- 7-1/2” large steady rest with roller jaws
- 3” follow rest
- Removeable gap
- 4-way tools post
- Foot brake
- Halogen Work light and coolant system
- Full length splash guard
- Dead centers
- Thread chasing dial
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...
AMXmachinery1
SIERRA MULTIPLE
PARTE: 2CK-MRS12FEATURESThe Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpillar feeding with heavy guided chain with rubber inserts. Chain blocks are special cast iron with heat treated & precision ground pinsNickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve3 sets of Anti-Kickback Fingers 2 top, 1 bottomPowered Rise & Fall to the pressure rollersNew style round Fence Bar support with quick shift lo...
AMXmachinery1
SIERRA MULTIPLE DE VAIVEN
PARTE: 2TA-TRS-150F - SIERRA MULTIPLE DE VAIVENFEATURESMinimum kerf multi blade frame saw designed to maximize production and minimize material loss.Thin frame saw design accepts different saw frames & blade combinations.Unique design allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass.Machine supplied with PLC controller to allow operator to maximize saw production & minimize down time.Production times are reduced because of the machine's du...
AMXmachinery1
MOLDURADORA – 5 CABEZALES – OMIL PLM 5
PARTE:
12351 - MOLDURADORA – 5 CABEZALES – OMIL PLM 5
USADA BUENAS CONDICIONESANCHO MAXIMO 160 MMALTO MAXIMO 90 MMLARGO MINIMO 200 MMCABEZALES 5500 RPM6 MOTORES POTENCIA TOTAL
45.5 HP
HECHA EN BRASIL