Identificador: 2587
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD 26” X 120”
NUEVO CON GARANTIA
- ISO 9001 certified
- Large spindle bore 4-1/8”
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 16”
- Heavy Duty main motor 10HP
- 16 spindle speeds from 25-1,600 rpm, 16 speeds
- 54 kinds of inch threads, and 54 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 26" |
| Max. length of workpiece | 120" |
| Max. swing over cross slide | 17 1/4" |
| Max. Swing in gap | 35 3/8" |
| Width of Bed | 16" |
| Effective length in gap to spindle | 9" |
| Effective length in gap to chuck jaws | 4 1/2" |
| Spindle bore | 4 1/8" D1-8 |
| Taper of spindle center | M.T. #5 |
| Spindle speeds | 25-1,600 rpm / 16 steps |
| Longitudinal feeds | 0.0016-0.055 IPR, 25 kinds |
| Cross feeds | 0.0008-0.027 IPR, 25 kinds |
| Inch threads | 80-7/16 TPI, 54 kinds |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PRENSA HIDRAULICA PARA PEGAR
PARTE: 4ST-SL3 - PRENSA HIDRAULICA PARA PEGARHYDRAULIC PRESS FOR LAMINATED BEAMSCLASSICS FOR GLUINGIs an electro-hydraulic press for the production of structural laminated beams.Its solid structure combined with its ease of setup and use make it the optimal solutionfor the production of laminated beams and blockboard panels.The working unit consists of cylinders and pressers equipped with independent opening/closing valves,sliding front pressers and front loading and unloading thanks to the pres...
AMXmachinery1
ALIMENTADOR - 5 RUEDAS - CON BANDA
PARTE: 2CK-AF04Is specifically designed for feeding small workpieces which can not be fed properly using a conventional 3 and 4 roller feeders. The (3) synthetic rubber belts run on (5) feeder wheels which are closely coupled together. The result is the workpiece is held between the rollers allowing for the feeding of short and/or small material. The universal stand allows you to easily adjust the height and position of the feeder. It can also be positioned from a horizontal to vertica...
AMXmachinery1
ARMADORA DE PUERTAS
PARTE: 3HO-MH2324A B - ARMADORA DE PUERTASModel Choice Simplified(Single-Side): Compact footprint for workshops(Double-Side): Dual-station for high-volume output
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 14"
PARTE: 2CK-SRS330 - SIERRA MULTIPLE - 1 SIERRA - 14"Is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the SRS330 can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 13′, which eliminates the need to joint the material after rippingPrecision...