Identificador: 2587
Abierta
ID de articulo : # 2587 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD 26” X 120”
NUEVO CON GARANTIA
- ISO 9001 certified
- Large spindle bore 4-1/8”
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 16”
- Heavy Duty main motor 10HP
- 16 spindle speeds from 25-1,600 rpm, 16 speeds
- 54 kinds of inch threads, and 54 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 26" |
| Max. length of workpiece | 120" |
| Max. swing over cross slide | 17 1/4" |
| Max. Swing in gap | 35 3/8" |
| Width of Bed | 16" |
| Effective length in gap to spindle | 9" |
| Effective length in gap to chuck jaws | 4 1/2" |
| Spindle bore | 4 1/8" D1-8 |
| Taper of spindle center | M.T. #5 |
| Spindle speeds | 25-1,600 rpm / 16 steps |
| Longitudinal feeds | 0.0016-0.055 IPR, 25 kinds |
| Cross feeds | 0.0008-0.027 IPR, 25 kinds |
| Inch threads | 80-7/16 TPI, 54 kinds |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
MESA DE TIJERA - 4' x 8'
PARTE: 2CK-PH48-2 - MESA DE TIJERA - 4' x 8'Is strongly built with a massive steel frame that provides maximum durability and is capable of lifting up to 4400 lbs. It is hydraulically operated and controlled by a foot pedal for operator convenience. The PH48-2 is adjustable in height from 14” up to 71”. It is ideal for staging material for feeding into various woodworking machines like sanders, glue spreaders, panel saws, ripsaws, and more.4400 lifting capacity4’x8’ deck size14” t...
-500x500.png)
AMXmachinery1
SIERRA TRONZADORA PARA ATAUDES
PARTE: 2DO-CFS - SIERRA TRONZADORA PARA ATAUDESLong part of a casket top coming out from the RF Press made of hardwoodOne (1) frame with two (2) cutting stationsOne (1) cutting station is mobile to adjust for length of casket with
pneumatic cylinder and adjustable stopping positionEach cutting stations include:Two (2) 5HP motors at 3500 RPM with 20'' blade mounted on a pneumatic armAdjustable fence and horizontal and vertical pneumatic hold downsPneumatic fixtures to adjust for casket model - ...
-500x500.png)
AMXmachinery1
CEPILLO 1 CARA - 26" ANCHO
PARTE: 2EX-XP-126T - CEPILLO 1 CARA - 26" ANCHOComes in 24″, 26″, 30″ & 40″ width. Is available with VECTOR Cutterhead, infeed roller, heavy duty internal drive system, and a PLC controller.Available with VECTOR, STEALTH, MACH or straight knife cutter heads 11-3/4” thickness capacityHigh Horsepowers: 20 HP & 15 HP6000 RPM cutterheadPowered top and bottom bed rollersMotorized table elevationDigital thickness controllerSolid cast-iron constructionTriple v-beltsSectional chipbreakers Ex...
-500x500.jpg)
AMXmachinery1
ENCHAPADORA DE CANTOS - AUTOMATICA
PARTE:
2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICANueva con GarantiaIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX350M can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end tri...