ID: 1695
Open
Description
PARTE: 2CK-SS512CB
- 1 ¼” interchangeable spindle is standard (other sizes available)
- Large cast-iron table is ground and polished for maximum stability and durability
- Powerful 7.5 HP motor for even the most demanding profiling work
- Five spindle speeds can be easily adjusted to suit your tool diameter
- Electronic spindle brake for added safety and facilitates with fast changeover
- Precision fence assembly with micro infeed and outfeed fence adjustment
- Finger style fence allows fence to be adjusted around the cutter for added safety and workpiece stability
- Cast iron ground & polished table with insert rings & t-slot for mitre / tenoning jig
- Precision ground and electronically balanced spindle
- V-belt drive with (5) spindle speeds is easily accessed from the front of the machine (3/4/6/8/1000 RPM)
- Electric spindle brake for added safety
- Spindle lock – with limit switch safety, machine will not start with lock engaged
- Micro spindle height adjustment with dial indicator for precise height adjustment
- 1 ¼” Interchangeable cutter spindle is standard
- Forward/reverse spindle rotation
- Adjustable “finger” type fence
- Independent micro-fence adjustment on both sides
- Plug to accept Cantek Power Feeder and table is pre-drilled for mounding feeder base
Includes the following standard equipment:
- 1 ¼” spindle
- (1) 5” dust chute on guard & (1) 4” dust chute in the table
- Safety guard
- Mitre tenoning jig
|
Table size |
31 1/2 “ x 39.4” |
|
Spindle speeds (5) |
3000/4000/6000/8000/10000 RPM |
|
Spindle taper |
5 MT |
|
Spindle diameter |
1 ¼” |
|
Motor |
7.5 HP |
|
Largest diameter of cutter: |
|
|
Above table |
8 ¼” |
|
Below table |
13 ¼” |
|
Fence size |
6” x 43” |
|
Vertical spindle stroke |
7” |
|
Useable length of spindle |
5 ½” long |
|
Dust port |
(1)5” on guard, (1) 4” in table |
|
Total HP |
7.5 HP |
|
Net weight |
1034 lbs. |
|
Machine dimensions |
48.4” x 39.4” x 52 ¾” |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-0410EISO 9001 certifiedTaiwan machines24” German SIKO Front Operated power back gauge w/ micro adjustment 0.004” , inch/mm digital displayQuick Change Blade Gap Adjustment (BGA), with gap dialCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and strokeBall transfer plates on worktable for easy loading workpieceWell balanced and stu...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 10' X 10 GA
DOBLADORA DE METAL 10' X 10 GA PARTE: 2GM-1010EThis machine has a 7 1/2 HP Motor, rated at 220V three phase.Power bending roll up/down with push button & display. 6.70" RollsSO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for ...
-500x500.jpg)
AMXmachinery1
SIERRA DE PANELES AUTOMATICA
PARTE: 2CK-TPS-SH - SIERRA DE PANELES AUTOMATICA Production panel sizing solution for the small to mid-sized manufacturer. The industrial machine design combined with user friendly PC control interface ensure accurately dimensions sheet components with a chip free finish. Available in 8’, 10’, 12’ with front loading. The powerful 18HP saw motor and carriage runs on two round hardened guide rails on (8) copper wheels. The saw carriage cutting speed is variably adjusted according to ...
AMXmachinery1
SIERRA MULTIPLE - 3 SIERRAS MOVIBLES
PARTE: 2CK-MRS450MFEATURESThe Main Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stabilityHD Precision Straight Line Feeding caterpillar Chain typeFeed Chain with easily Replaceable bolt in Cast Steel or Urethane Pads – optionalFully Programmable Position sets (10 programs of 10 sets each) or Infinitely variable foot pedal position set.User friendly Touch Screen control (free standing operators control console) is integrated with a 32 bit micro process or...