Identificador: 1605
Abierta
SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 168” X 66” X 3-1/8”
AMXmachinery
Descripción
PARTE: 2ST-STANDARD - SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA
• Swiss made quality for accuracy and durability!
• Very stable, all welded steel frame suitable for free-standing or wall-mount installation
• Heavy-duty panel support rollers with integral foot pedal braking system
• Convenient, sturdy, two-section mid-shelf with moveable aluminum fingers allows comfortable working of small parts and ability to stage material on one side of the saw
• Snap-in aluminum small parts supports (pair) for stability of small parts cutting on mid-shelf
• Automatic, mechanically shifting aluminum support grid with replaceable plastic laths
• Full length measuring channel with inches/metric scales and measuring flip stop
• Second measuring channel with one auxiliary 4” wide flip stop
• Vertical cutting stations 40 inches on center (1 meter optional)
• TRK dust collection system with cable chain hose take-up; note: requires connection to a collector
• 7-1/2 hp, 220/440V, 3-phase motor with brake, Y- soft starter, and insulation to 77dB
• 300 mm (11-7/8”) HFG (hollow face) carbide saw blade
• Main blade, climb-cut scoring for chip-free cutting of melamine, veneers, and laminates
• Template bar with six stops for setting typical horizontal cuts
• Repeat rip device with roller follower and 5’ capacity for strip cutting from top of panel
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TROMPO COPIADOR 28" MESA ROTATIVA
PARTE # 2TA-CS-0028 - TROMPO COPIADOR 28" - MESA ROTATIVA - AUTOMATICOCaracteristicas: - All operation controls are concentrated in the control box, and the controls are well arranged on the control panel for easier touch up to operation.- Equipped with PC program control for easy maintance and durability usage.- The easy set up at any position, 2 variable speeds table turning makes it possible for the machine to be operated at any cutting speed up to maximum.- The variable cutting feed rate ...
AMXmachinery
PARTE: 12270 – MONTACARGAS – 5,000 A 6,000 LBS - CATERPILLAR
PARTE: 12270 – MONTACARGAS – 5,000
A 6,000 LBS - CATERPILLAR
USADO
- BUENAS CONDICIONES
RODADA 10 ATRÁS
RODADA 12 ENFRENTE
GAS LP
-500x500.jpg)
AMXmachinery
PARTE: 2GB-160 - CORTADORES - FINGER JOINT - ESTILO JAPONES - 2 ALAS
PARTE: 2GB-160 - CORTADORES - FINGER JOINT - ESTILO JAPONES - 2 ALASPARA TROMPO O ESPIGADORADIAMETROTOTALESPESORFLECHALONGITUDJOINTPARTE #160mm4.0mm70mm12mm2GB-160X4X0.6X70-2T160mm4.0mm50mm12mm2GB-160X4X0.6X50-2T160mm9.0mm50mm12mm2GB-160X9X50-2T160mm10.0mm50mm12mm2GB-160X10X50-2T
AMXmachinery
PARTE: 2GM-PBR - ROLADORA ELECTRICA - 4-10 PIES
PARTE:
2GM-PBR - ROLADORA ELECTRICA - 4-10 PIES
RODILLO
DOBLADOR ENDURECIDO DE 4 – 10 PIES PARTE: 2GM-PBR-0412 - 4’x12Ga - Mov. Manual del Roll, 2HP, 220V, 3PH.PARTE: 2GM-PBR-0412E - 4’x12Ga - Mov. Eléctrico del Roll, 2HP, 220/440V, 3PH.PARTE: 2GM-PBR-04316E - 4’x3/16” - Mov. Eléctrico del Roll, 3HP, 220/440V, 3PH.PARTE: 2GM-PBR-0425E - 4’x1/4” - Mov. Eléctrico del Roll, 5HP, 220/440V, 3PH.PARTE: 2GM-PBR-0510E - 5’X10Ga - Mov. Eléctrico del Roll, 3HP, 220/440V, 3PH.PART...