Identificador: 1143
Abierta
ID de articulo : # 1143 se ha agregado a su lista de deseos.
Descripción
PARTE: 4EL-LANCET - SIERRA VERTICAL - CON NAVAJA - ELCON
How to improve/speed up the processing of multiwall polycarbonate sheets?
By using a static knife instead of a sawblade.
This reduces the amount of time spent on cleaning out the channels. The static knife delivers precise and clean cuts, without chips. Thus reducing wasting time on the post-processing. Some of the companies owning a Lancet reported up to 75% time saved.
The Elcon Lancet is another #custombuilt solution that very few people know about.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA – AUTOMATICA – CAPACIDAD 10”
PARTE: HA250W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 10” - AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity
Round
(Diameter) 1.18"-10"
Rectangle
(W x H) 11.8" x 10"
Work
Load Capacity 3,307 lbs.
Material
Index Stroke 15.75" (Maximum 9 Times Index)
Index
Length 0.394" x 141.7"
Saw
Blade Dimensions (L x T x W) 11'6" x 0.042" x 1-1/4"
Blade
Speed 89-295 ft./min, 60 Hz, Stepless
Saw
Blade Motor 5 HP
Hydraulic
Pump Motor 1 HP
...
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S50
PARTE: 12420 – SIERRA OPTIMIZADORA
– WEINIG DIMTER OPTICUT S50
USADA – MUY BUENAS CONDICIONESVoltage:
440/3/60Year:
2013
4" x 12" wide max. board capacity 14`
material capacity infeed & 8` outfeed table Loading bars attached to front
of infeed table Equipped with 9 HP arbor motor, 1.5 HP pusher bar servo motor,
197 FPM max. feed speed; Servo controlled pusher arm travels full length of
board, measures, positions and feeds board into saw; capable of single-piece
& pack...
AMXmachinery
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
PARTE: 2MA-640CE -
SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP for 3-Phase Option, 3 HP for Single
Phase Option, 2800 RPM motor400 mm (15.75") Blade diameter (not
included)62.20" x 38.39" Table size21.5" Max crosscut length on 3/4"
thick material0 to 33.8" Rip capacity4.9" Max depth of cut15" Max cut length at 45 deg. On right
side...
AMXmachinery
PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPA
PARTE: 3NN-VENEERSOLIDM1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPAChapa Pre-Engomada requerida Machine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mm(solutions of splicing veneers with thickness of 1.5 ~ 3.5 mm offered)Veneer Strip Length：min. 200 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 30 m/min.Electric Power：approx. 5.9 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：800 mmDimensions (L x W x H)：1...