Identificador: 1249
Abierta
Descripción
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear Driven Spindles on 32mm Centers
Index Pins
3 HP Spindle Drive Motor, TEFC
10mm Bored Collets
(12) Right Hand, (11) Left Hand
12″ Throat Depth
60″ Back Fence With (4) Stops
24″ X 48″ Work Table Surface
(2) Spring Operated Hold Downs
Wired 3-Phase 240/480 Volt, 60 Hz.
Pneumatic Driven Boring Cycle
Tooling Not Included
Crated Dimensions: 45″ X 80″ X 78″ H and 740 Lbs
Options
R19F1 – Single Phase Machine
An upgrade to the R113, this unit is foot pedal operated. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12645 - SISTEMA FINGER JOINT - INDUSTRIAL - FJS-25
PARTE: 12645 - SISTEMA FINGER JOINT - INDUSTRIAL - FJS-25USADA - BUENAS
CONDICIONESINCLUYE4 Troceros neumáticos
con escalera de rodillos 16 pies de largoAditamento para
pegar 18 pies de largoAfiladora y Alineador
de cuchilla
Cabezales y Serruchos
igualadores
AMXmachinery
PARTE: 12446 - MOLDURADORA - 5 CABEZALES - PROFIMAT 235
PARTE: 12446 - MOLDURADORA -
5 CABEZALES - PROFIMAT 235
USADA - BUENAS CONDICIONES5 heads bottom, right, left, top, bottom9-1/16" x 4-11/16" capacity20-78 FPM variable feedMechanical readouts on all spindlespowered out feed rollerstraightening vane
Mfg: 1996440 volt, 3 phase, 60 cycle
AMXmachinery
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
COMO NUEVO - SIN USARPARA SIERRAS CINTAS DE 1" A 1-1/2" CON 7/8" DE ESPACIO ENTRE LOS DIENTES (TOOTH SPACING)VOLTAGE 115/230 VAC
FRECUENCY: 50 - 60 HZ
PHASE 1
FULL LOAD AMPS: 5.0 / 2.5 A
DIAGRAM # 5520-989MANUAL DEL USUARIO INCLUIDO
AMXmachinery
SIERRA OPTIMIZADORA
PARTE # 2OM-T2010NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONPARTE # 2OM-T2020NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONPARTE # 2OM-T2030NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONNUEVA CON GARANTIACaracteristicas:Last Generation automatic programmable cut-off saw for optimized cutting of wood stock and defect removal.Particularly suitable for medium production requirements.The maximum feed speed of 400 FPM makes of the T 2010 NC a compact, flexible and highly productive system.The set of 5 top pre...