Identificador: 1263
Abierta
ID de articulo : # 1263 se ha agregado a su lista de deseos.
Descripción
PARTE: 3HP-HP-400-4 - REASERRADORA HORIZONTAL – 4 SIERRA BANDAS – CON REGRESADOR
Nueva con garantía
Para mas informacion, solicite una cotizacion detallada,
1.With Digital Readout
2.Max. Workpiece Size: 400mm(W) x 250mm(H)
3.Conveyor Belt Size: 385mm(W) x 14840mm(L)
4.Saw Wheel Dimension: Φ28" x 2"(Thickness)
5.Saw Blade Size: 208"(L) x 2"(W)
6.Dust Hood Diameter: 4" x 8
7.In-feed Speed: 4-20M/min
8.Cutting Size: 4-250mm(T)
9.Saw Blade Tensioning by Hydraulic Compensation System
10.Main Motor: 30HP x4
11.Hydraulic Motor: 3HP
12.Elevation Motor: 1/4HP 6P x4
13.Machine Dimensions/Weight: 5700 x 2130 x 2000mm /6800kgs
Packing Dimensions/Weight: 5760 x 2230 x 2160mm /7000kgs
14.Mist Coolant System
15.Air Cylinder Hold Down Pressure Roller
16.Min. Length of Working Piece: 600mm
17.With Inverter Motor: 30HP x4
18.Rubber Pressure Roller
19.With Return Conveyor
20.Saw kerf: 1.35mm
21._______Volt, _______Hertz
Accuracy of cut: - 0.1 mm
Production parameters: continuous production
Oak Laminated board
Humidity 50-80%
Length 400 - 2300
Width 100-300
Thickness up to 4-7mm
In feed speed 7-10 M/min.
8 hrs. / per day
22 days/ per month
Production 225-300 m^3/month
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60 LARGO MM
PARTE: 12108 – CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60 LARGO MMUSADOS – COMPLETOS - EN BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
5,100.00 MXN
AMXmachinery
TALADRO MULTIPLE HORIZONTAL – CONQUEST BO173
PARTE: 12050 – TALADRO MULTIPLE HORIZONTAL – CONQUEST BO173Usada en Buenas Condiciones
AMXmachinery
DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
PART:
AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used
- Good condition
Two (2) saws fixed at 45° angle (saw heads are adjustable up
to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle
connected to 220V
3,900 blade RPM
Back fence
2 New On/Off
Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting
capacity with 10" blades:
2-1/2" width x 3-1/4" height
Machine capacity up to 12” diameter...
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 36210
PARTE: 12127 - ROUTER PIN INVERTIDO - CR ONSRUD 36210
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
10 HP motor, belt driven to spindle
25,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
43" x 31" acrylic topped table
36" throat depth
3-Position adjustable depth stop, infinitely
adjustable
Maximum workpiece/template height is 4"
3/4" max. Chucking capacity
Magnetic starter with over...