Identificador: 1303
Abierta
ID de articulo : # 1303 se ha agregado a su lista de deseos.
Descripción
PARTE: 4VE-VFL-1400-CRL - LAMINADORA DE PANELES - COMPACTA - FOIL
Nueva con garantía
COMPONENTES:
PARTE: 4VE-VCH-1300-L3-NABI - TRANSPORTADOR CON 4 CALENTADORES INFRAROJOS Y CEPILLO
NO STANDARD SPECIFICATIONS QTY
1 Silicone coated pipes (with anti static system ) 20
2 Panel guiding system (Adjustable from the center) 1
3 The belt drive system 0
TECHNICAL DATA
MOTOR POWER : 0,75 kW 900 d/d i : 7,5 geared
CONVEYOR WORKING SPEED : 5 - 30 m / min
ROLL DIAMETER AND LENGTH : Ø63mm x 1450 mm
ROLLER AXIS INTERVAL : 150 mm
CONVEYOR WORKING HEIGHT : 1000 mm
CONVEYOR WORKING WIDTH : 200 - 1300 mm
CONVEYOR DIMENSIONS : 1600 x 3000 x 1000 mm , 400 kg
PARTE: 4VE-VFL-1400-C - APLICADOR COMPACTO DE PEGAMENTO PLANO
NO STANDARD SPECIFICATIONS QTY
1 Laminating machine just for flat surfaces 1
2 Steel Gluing Roller, Silicon Dosage Roller, Silicone Pressure Roller 1
3 Heating system 4
4 Glue level sensor 1
5 PLC screen 1
TECHNICAL DATA
MOTOR POWER : -
DOSAGE ROLLER : 0,75 kW 1400 d/d i : 50 geared
GLUE APPLİCATİON ROLLER : 1,5 kW 1400 d/d i : 40 geared
PALET GRUBU : 2,2 kW 1400 d/d i : 50 geared
ISITICI GÜCÜ : -
HEATER POWER : 4,8 kW
GLUE APPLİCATİON ROLLER : 4,8 kW
TOTAL POWER : 20,35 kW Gluing System
PALLET WORKING SPEED : 5 - 15 m / min
ROLL DIAMETER AND FEATURE : -
DOSAGE ROLLER : Ø 218 mm (Silicon)
GLUE APPLİCATİON ROLLER : Ø 240 mm (Steel)
PRESSURE ROLLER : Ø 250 mm (rubber coating)
PANEL OPERATING RANGE : 4mm - 45 mm
CONVEYOR WORKING WIDTH : 200 - 1300 mm
DIMENSIONS : 2500 x 2000 x 1850 mm (W x D x H)
PARTE: 4VE-VCH-1300-L2-NA - TRANSPORTADOR DE SALIDA
NO STANDARD SPECIFICATIONS QTY
1 Silicone coated pipes 14
2 The belt drive system 1
3 Suitable till 1300 mm panel width 1
4 Panel guiding system (Adjustable from the center) 1
TECHNICAL DATA
MOTOR POWER : 1,1 kW 1400 d/d i: 10 geared
CONVEYOR WORKING SPEED : 5 - 30 m / min
ROLL DIAMETER AND LENGTH : Ø63mm x 1450 mm
ROLLER AXIS INTERVAL : 150 mm
CONVEYOR WORKING HEIGHT : 1000 mm
CONVEYOR WORKING WIDTH : 200 - 1300 mm
CONVEYOR DIMENSIONS : 1600 x 2000 x 1000 mm , 400 kg
PARTE: 4VE-HY-M-55 - 200 KG TAMBOR, MANGUERAS, PISTOLAS APLICADORAS
NO STANDARD SPECIFICATIONS QTY
1 Suitable for panel laminating line 1
2 Stable Gluing 1
3 Quickly Melt Glue 1
4 Provide higher working speed 1
TECHNICAL DATA
200KG DRUM :
WORKİNG ABİLİTY : 50kg/Hour
SİZE : 1660 x 650 x 2240 mm
WEİGHT : 305 kg
MAİN POWER : 14,6 Kw
WORKİNG VOLTAGE : 380V 50/60HZ
AİR COMPRESSOR : 8,0 kg/cm2
MOTOR ROTATİNG : 0,5 - 60 / min
HOSE 5M : 2 pcs
GLUE GUNS : 2 pcs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
TORNO COPIADOR MANGOS HERRAMIENTA
PARTE # 32MF-1100 - TORNO COPIADOR PARA MANGOS O CABOS DE HERRAMIENTANuevo con garantiaRango de longitud: 200 a 1100 mmDiámetro máximo: 120 mmMotor de 20 hpMotor de rotación de 1/4 hpEje de aluminio de 55 mmCuchillas HSS
AMXmachinery
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL
BAND RESAW2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTYWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motor
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
...
AMXmachinery
SIERRA RADIAL - BIG 800CE - 4 HP - DISCO 15.75”
PARTE: 2MA-800CE -
SIERRA RADIAL - BIG 800CE - 4 HP - DISCO 15.75”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP, 2800 RPM motor400 mm (15.75") Blade diameter capacity
(Not included)30 mm Arbor diameter73.23" x 45.08" Table size27.75" Max crosscut length on 3/4"
thick material (90 deg)0 to 40.5" Rip capacity4.9" Max depth of cut19.68" Max cut length at 45 deg on right
side12.20" Max cut...
AMXmachinery
GRABADORA LASER 40" X 24"
PARTE: 2TA-CLC4024 - GRABADORA LASER CNC 40" X 24"NUEVA CON GARANTIA39.6" X 23.6" GRABADORA/CORTADORA LASER- Applications for most material and may industries. Some include but not limited to wood, leather, marble, glass, paper, rubbery, plastic, cloth, ABS and many more.- Durable and steady are key features using double guide-rails that ensure long life of motion and accuracy.- Unique optics structure of the fly ray, which has low warp with high, steady and easy optical adjustment.- Adaptation ...