Identificador: 1525
Abierta
ID de articulo : # 1525 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-TG-9330 - AFILADORA DE CUCHILLAS PARA MOLDURADORA
NUEVA CON GARANTIA
FEATURES:
- Economical model for small shop.
- Work table back to front, left to right is moved on linear bearing cross roller rail sets, accuracy and durability.
- Grinding wheel head is micro adjustable and accurate. 2 HP variable speed control motor for powerful grinding.
- Easy setup template holder for accurate copy tracer.
- Knife-edge angle is adjusted by dovetails are grooved; grinding center is never changed, no matter what the angle is.
- Water splash guard and coolant tank are made with stainless steel to protect from rust.
- Easy and efficient to operate.
- Heavy sheet metal cabinet stand and cast iron body.
- High precision and durability.
|
SPECIFICATIONS |
2TA-TG-923 |
2TA-TG-9330 |
|
Grinding Capacity |
||
|
Cutter (Dia. x W) |
12" x 10" |
12" x 12" |
|
Grinding Wheel Size |
7.5", 60mm Dia |
8" x 2¼" |
|
Grinding Head Travel |
13" |
13" |
|
Grinding Wheel Speed |
1500-4500 RPM (Var) |
1500-2900 RPM (Var) |
|
Grinding Wheel Motor |
2 HP |
2 HP |
|
Coolant Pump Motor |
1/8 HP |
1/8 HP |
|
N.W. (LBS) |
1050 LBS |
1100 LBS |
|
G.W. (LBS) |
1450 LBS |
1500 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12516 - COMPRESOR TORNILLO - INGERSOL-RAND – 20 HP
PARTE: 12516 - COMPRESOR TORNILLO - INGERSOL-RAND – 20 HP
USADA - BUENAS CONDICIONES
220/440V, 3 FASES, CONECTADO ACTUALMENTE A 440V
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI
AMXmachinery
PARTE: 12601 – TALADRO DE BISAGRAS - HETTICH
PARTE: 12601 – TALADRO DE BISAGRAS - HETTICHUSADA - BUENAS CONDICIONESMarca: HettichModelo: 04759Voltaje: 220VAC 1fasePresión de aire: 100PSITaladro para bisagras semiautomático baja por medio de cilindro neumático al pulsar un botón.
AMXmachinery
PARTE: 12641 - SIERRA CINTA - CON ALIMENTADOR - 48” DIAMETRO VOLANTES - TURNER
PARTE: 12641 -
SIERRA CINTA - CON ALIMENTADOR - 48” DIAMETRO VOLANTES - TURNER
USADA - BUENAS
CONDICIONESTablero
electrico 440 volts
variador de velocidadEn roles
lateralesInclinacion 45
gradosTuberia de extracciónMotor 40 HP Rodillo de
alimentaciónMesa de salida
Sierra Cintas
1/16 escuadra metálica para tiras