Identificador: 1541
Abierta
ID de articulo : # 1541 se ha agregado a su lista de deseos.
Descripción
PARTE: 2MA-640CE - SIERRA RADIAL - JUNIOR 640CE - DISCO 15.75” - 4 HP - LARGO 21.5”
NUEVA CON GARANTIA
Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid.
European quality made to last!
4 HP for 3-Phase Option, 3 HP for Single Phase Option, 2800 RPM motor
400 mm (15.75") Blade diameter (not included)
62.20" x 38.39" Table size
21.5" Max crosscut length on 3/4" thick material
0 to 33.8" Rip capacity
4.9" Max depth of cut
15" Max cut length at 45 deg. On right side
7.5" Max cut length at 45 deg. On left side
Dust chute on blade guard as well as rear of table
Machine weight: 447 Lbs.
Machine dimensions: 62" x 55" x 61" T
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SISTEMA FINGER JOINT - AUTOMATICO - CAP 4” X 141”
PARTE: 2TA-SFJ-4-141-AUTO
- SISTEMA FINGER JOINT - AUTOMATICO - CAP 4” X 141”
Nueva con garantía
Incluye: Mesa Entrada Motorizada, Trompo Derecho, Trompo
Izquierdo y PrensaFeatures:
The fully automatic production
line complete with the right hand shaper, left hand shaper, and assembler
to produce the mass finger joint stocks.
The right hand shaper performs
end trimming and shaping functions on right end of sticks.
The left hand shaper performs
end t...
AMXmachinery
TORNO DESENROLLADOR - ANCHO 100”
PARTE: 11721 - TORNO DESENROLLADOR - ANCHO 100”
2 - TORNO DE DESENROLLO DE 100 PULG (8 PIES) MARCA
WATARAY PARA DESENROLLO CHAPA 8 PIES DE LARGO Y DIAMETRO DE 10 A 40 PULGADAS
CON GROSOR DE DESENROLLO DE 1.0 MM A 4.5 MM CON CAPACIDAD DE PROCESO DE 15,000
PIES2 POR TURNO CON MOTOR DE 40 HP Y MOTOR PARA DIFERENTES MEDIDAS DE TROCERIA
Y POTENCIOMETRO CON CONTROL PARA OPERADOR CON 400 RPM MAXIMO.
AMXmachinery
PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP
PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP
USADO - BUENAS CONDICIONES
MOTOR 7.5 HP, 208-230/460V, 3
FASES, 3450 RPM, BALDOR
ENTRADA REDONDA: 8.5”
SALIDA RECTANGULAR: 4” X 8”
MEDIDAS TOTALES: 23” ANCHO X 21”
FONDO X 21” ALTO
AMXmachinery
SIERRA - RIP SAW - MATTISON
PARTE:
12397 - SIERRA - RIP SAW - MATTISON
USADA - BUENAS
CONDICIONES
Limpiada y Revisada Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual
Hand-Crank
Spindle
Speed: 3,600 RPM