Identificador: 246
Abierta
ID de articulo : # 246 se ha agregado a su lista de deseos.
Descripción
PARTE # 32A-M410 - MOLDURADORA 4 CABEZALES - ANCHO 10" - 3 FASES
PARTE # 32A-M410S - MOLDURADORA 4 CABEZALES - ANCHO 10" - 2 FASES
PARTE # 32A-M412 - MOLDURADORA 4 CABEZALES - ANCHO 12" - 3 FASES
NUEVAS CON GARANTIA
CARACTERISTICAS | M-410 | M-410S | M-412 |
ANCHO MAXIMO TRABAJO | 10” | 10” | 12” |
LARGO MINIMO MATERIAL | 10” | 10” | 10” |
VOLTAGE | 3 FASES | 2 FASES | 3 FASES |
MOTOR SUPERIOR | 4 HP | 3 HP | 7.5 HP |
MOTOR INFERIOR | 4 HP | 3 HP | 5 HP |
MOTOR LADOS (2) | 4 HP | 3 HP | 4 HP |
CABEZALES LATERALES 30 MM – ESTILO EUROPEO | SI | SI | SI |
CAP. CORTE CABEZAL SUPERIOR | CEPILLADO: 5/16” MOLDURADO 3/8” | CEPILLADO: 5/16” MOLDURADO 3/8” | CEPILLADO: 5/16” MOLDURADO 3/4” |
CUCHILLAS PLANAS INCLUIDAS CABEZAL SUP E INF. (2 EN CADA CABEZAL) | SI | SI | SI |
DEPOSITO ACEITE PARA LUBRICAR MESA | SI | SI | SI |
MECANISMO DIGITAL MESA | NO | NO | SI |
DIMENSIONES DE ENVIO | 136X115X115 CM | 136X115X115 CM | 145X115X115 CM |
PESO | NETO: 680 KG ENVIO: 750 KG | NETO: 680 KG ENVIO: 750 KG | NETO: 680 KG ENVIO: 750 KG |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CALIPER DE BOLSILLO – STARRETT 1025
PARTE: 2EB-STA-1025-6 – CALIPER DE
BOLSILLO – STARRETT 1025
NUEVO CON GARANTIARange 0
in to 4 3/4 in, Graduations 1/32 in, 1/64 in, Accuracy /-0.003 in, Material
Stainless Steel, Dimension Type Fractional Inch, Graduations - Lower Scale 1/32
in, Graduations - Upper Scale 1/64 in, Jaw Actuation Type Slide, Jaw Depth 1
3/8 in, Maximum Measurement - Decimal Inch 4.75 in, Maximum Measurement -
Fractional Inch 4 3/4 in, Measurements Inside, Outside, Measures Depth No,
Measures Inside D...
AMXmachinery
ASTILLADOR SCHUTTE
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360IN GOOD CONDITIONS, AS-ISTop infeed is 21-1/2" x 23".Currently has 1" thick swinging hammers. Screen included (not installed) has 1/2" dia. round holes. Has been modified to a pneumatic discharge.Includes sub base, motor pedestal and permanent magnet installed in infeed chute.
AMXmachinery
PARTE: 2WO-001 - SEPARADOR MAGNETICO – USO RUDO
PARTE: 2WO-001 - SEPARADOR MAGNETICO – USO RUDO
Nuevo con garantía
Motor 3HP, 220/440V, 3 fases
Banda: 32” x 6 pies
Lengh: 89.6in
Width: 49in
Height: 22.5in
Weight: 1710 lbs
Reduction ratio: 1:15
Roller rotational speed: 116RPM
Medidas de envio: 2276 LARGO X
1216 ANCHO X 572 ALTO (MM)
Peso: 776 kg
AMXmachinery
LIJADORA DE BANDA Y DISCO DE BANCO
PARTE: 2AR-97181 - LIJADORA DE BANDA Y DISCO 3.5 AMPSAC Volts: 120Accessories Included: Miter gauge, sanding belt and sanding discAmperage (amps): 3.5Belt width: 4 in.Diameter: 6 in.Horsepower (hp): 3/4Speed (max): 1819 RPM (disc) / 1185 FPM (belt)Product Weight: 27 lb.Shipping Weight: 28.80 lb.Table tilt (deg): 60°