Identificador: 1547
Abierta
ID de articulo : # 1547 se ha agregado a su lista de deseos.
Descripción
PARTE: 12318 - CALDERA - CLEAVER BROOKS - 200 HP
USADA - BUENAS CONDICIONES
MFG: 2014
MODEL: FLX
FUEL SERIES: 700
SIZE: 900
PRESSURE: 15 ST
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12635 - ESPIGADORA – MESA DOBLE – BACCI
PARTE: 12635 - ESPIGADORA
– MESA DOBLE – BACCI
USADA – MUY
BUENAS CONDICIONES
Spindle Speed: 5,700 RPM
Maximum Tenon Lenght:
110mm
Maximum Tenon Depth: 90mm
Maximum Tenon Thickness:
40mm
Cutterhead Motor: 4 HP
Motor for Table Movement:
1 HP
Motor for Cutterhead
Cycle: 1.5 HP
Two Pneumatic Hold-Downs
Twin 15" x 12"
Tables
Manual Hand-Cranks for
Set-Up
Push-Button
Controls
380/400v,
3ph
AMXmachinery
CALIPER DE BOLSILLO – STARRETT 1025
PARTE: 2EB-STA-1025-6 – CALIPER DE
BOLSILLO – STARRETT 1025
NUEVO CON GARANTIARange 0
in to 4 3/4 in, Graduations 1/32 in, 1/64 in, Accuracy /-0.003 in, Material
Stainless Steel, Dimension Type Fractional Inch, Graduations - Lower Scale 1/32
in, Graduations - Upper Scale 1/64 in, Jaw Actuation Type Slide, Jaw Depth 1
3/8 in, Maximum Measurement - Decimal Inch 4.75 in, Maximum Measurement -
Fractional Inch 4 3/4 in, Measurements Inside, Outside, Measures Depth No,
Measures Inside D...
AMXmachinery
MESA CLAVADORA BASTIDORES - 4 X 8 PIES
PARTE: 2RT-R375V - MESA CLAVADORA BASTIDORES - 4 X 8 PIES4′ X 8′ Vertical Assembly EaselSecond Squaring Bar(6) Universal Clamping Cylinder & ManifoldFoot Treadle45 Degree Vertical EaselSquaring Bars on Right and Left Sides2″ Cylinder Position Grid Pattern3″ Bore Clamp Cylinder HousingPerforated Steel TableManifold with 1/4″ NPT Regulator/GageDesigned and Manufactured in the USAAdditional options for this machine include:U300E04 – Additional Clamp CylinderU300E16 – Foot TreadleU4501...
AMXmachinery
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
USADA - BUENAS CONDICIONESManufactured
in 1999•
Combination sanding head with 5 ½”contact
drum and 3 ½” platen• 20 HP
TEFC Dual Voltage Motor, 460Volt, 3
Phase, 28 Amps• Start,
Stop and E-Stop buttons withmagnetic
starter and locking disconnect• Motor
brake Via E-Stop• 1 HP
feed motor• 37” x
75” Sanding belts• Manual
variable feed speed, 15 – 60 fpm• Manual
thickness adjustment with re...