Identificador: 407
Abierta
ID de articulo : # 407 se ha agregado a su lista de deseos.
.jpg)
PARTE: 2CA-BR-25NUR/BR-25MILL - TALADRO HORIZONTAL CON O SIN CABEZAL MULTIPLE
AMXmachinery
Descripción
PARTE: 2CA-BR-25NUR/BR-25MILL - TALADRO HORIZONTAL CON O SIN CABEZAL MULTIPLE
| Specifications | 2CA-BR-25KNUR / MILL |
|---|---|
| Motor Standard | 2 HP |
| Spindle Speed | 2900 RPM |
| Knuring / Milling Cutter heads | Optional by Customer request / Design |
| Stroke Distance | 0~3" (0~80 mm) |
| Table Size | 11.4" x 11.2" (290 x 285 mm) |
| Machine Size with Stand | 42" x 19" x 42" (1067 x 483 x 1067 mm) |
| Machine Size W/O Stand | 40" x 15" x 28" (1016 x 381 x 711 mm) |
| Packing Size | 44" x 21" x 44" (1118 x 521 x 1118 mm) |
| N. W. | 331 LBS (150 kg) |
| G. W. | 375 LBS (170 kg) |
- The BR-2SKNUR machine is Designed for knurling operations on the turned end to achieve secure jointing effect.
- The machine is a high production, automatic unit and is pneumatically operated with air clamp by a foot switch for convenient operation.
- The machine is supplied with one knurling cutter head as standard.
- Further sizes of knurling cutting head are supplied as optional.
- The BR-25MILL machine is designed for producing a round or taper section at the end of rod turning.
- The unit is pneumatically operated with air clamp and controlled by a foot switch for convenient operation.
- The machine is supplied with one set of cutter head as standard, cutter head diameter as per customer’s specification.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CUBIERTAS DE GOMA PARA VOLANTES SIERRA CINTA
CUBIERTAS DE GOMA PARA VOLANTES SIERRA CINTAPARTE: 1SL-R-BS-0024-RB – 2 PIEZAS PARA SIERRA CINTA 24” - DC-BS-0024MEDIDAS DISPONIBLES:16"18"24"
AMXmachinery
PARTE: AMX-10141 - ABANICO - 30” DIAMETRO - MOTOR ½ HP
PARTE: AMX-10141 - ABANICO - 30” DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
30” DIAMETRO
16” FONDO
MODELO: 41NC07
MOTOR: ½ HP, 115V, 60 HZ, 1 FASE
RPM: 1,100/850
AMXmachinery
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOS
PARTE: 2MT-CM15 – CORTA Y AGUJERA ESQUINAS – PARA LAMINA RECONOCIMIENTOSNueva con garantia6 combinaciones:Esquina NotchEsquina RedondaAgujeros EsquinasAgujeros CentradosCombinacion agujero y notchCombinacion agujero y redonda Peso: 4 kgDimensiones: 17.25 × 11.25 × 6 pulgadasDiámetro agujero: 1/8 y 3/32 El trabajo se hace en 1 solo pasoCortes rapidos, limpios y sin rebabasRadio adjustableRapida y facil de usarPrecision en cortes repetitivos
AMXmachinery
PARTE: 12269 – MONTACARGAS – 5,000 A 6,000 LBS - CATERPILLAR
PARTE: 12269 – MONTACARGAS – 5,000
A 6,000 LBS - CATERPILLAR
USADO
- BUENAS CONDICIONES
RODADA 10 ATRÁS
RODADA 12 ENFRENTE PARA TERRACERIA
MOVIMIENTO LATERAL DE CARGA
TORRE LEVANTE 3 SECCIONES
GAS LP