Identificador: 1576
Abierta
ID de articulo : # 1576 se ha agregado a su lista de deseos.
Descripción
PARTE: 12329 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - NORTHFIELD
USADO - BUENAS CONDICIONES
24" width cap. x 6" thickness cap.
Upper spring loaded staggered hold down fingers
Top/Bottom helical carbide heads
30HP; 3PH upper cutterhead motor
approx 20HP; 3PH lower cutterhead motor
5HP; 3PH variable speed feed motor with gear reducer
1HP; 3PH platen elevation motor
56" central distance between cutterheads
4" solid steel power driven lower feed rolls
Upper sectional feed rolls
Feed Speeds Adjust from 25 to 100 fpm
2" sectional chipbreakers
6" shortest butted piece capacity
12" shortest single piece capacity
1/4" minimum stock thickness
1/2" maximum depth of cut
Grinder: Lower grinder head swing out arm
Upper head grinder bar
Automatic lubricator
Electrical control console
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE # 2TA-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM NUEVA CON GARANTIAHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carri...
AMXmachinery
PARTE: 3YC-YOM-120-A – SET FLECHA - ESCOPLO OSCILANTE - 2 MESAS
PARTE: 3YC-YOM-120-A – SET FLECHA - ESCOPLO OSCILANTE - 2 MESASNuevo con garantíaFlechaBalerosBase hierro forjado
AMXmachinery
PARTE: 12438 – SIERRA OPTIMIZADORA – WEINIG DIMTER OPTICUT S90
PARTE: 12438 – SIERRA OPTIMIZADORA
– WEINIG DIMTER OPTICUT S90
USADA – MUY BUENAS CONDICIONES
Incoming
Lengths up to 248" (20')
Widths
3/4" Min to 14-1/4" Max
Thickness
3/8" Min to 4" Max
Automatic
Length Cutting: 800 Lengths Distributed onto 16 Cutting Lists can be
Stored. Input up to 200 Lengths per Cutting List is Possible
Saw
Motor 10HP
Saw
Blade Diameter 20-1/2"
Swiveling
Positioning Pusher Including Laser Photo-eye for...
AMXmachinery
PARTE: 12510 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 37” ANCHO - SCM
PARTE: 12510 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 37” ANCHO - SCM
USADA - MUY BUENAS CONDICIONESMUY POCO USO, SE USO SOLAMENTE EN UNA ESCUELA