Identificador: 1597
Abierta
ID de articulo : # 1597 se ha agregado a su lista de deseos.
Descripción
PARTE: 12345-1 - SIERRA DE MESA - DISCO 10” - MOTOR 2 HP - PLEGABLE - DEWALT
USADA - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12655-10 - MAQUINA DE INMERSION
PARTE: 12655-10
- MAQUINA DE INMERSION
USADA
ESPECIAL PARA EL BARNIZADO EN SERIE DE PATAS, SILLAS
DESARMADAS, JUGUETES, ETC.
DA UN ELEVADO AUMENTO DE PRODUCCION
NO REQUIERE DE PERSONA ESPECIALIZADA
NOTABLE AHORRO DE BARNIZ
MOVIMIENTO
MONTADA SOBRE BALEROS DE ESFERAS, SELLADOS,
PRELUBRICADOS PARA EVITAR CAIDA DE ACEITE AL BARNIZ
-500x500.jpg)
AMXmachinery
PARTE: 12540 - PINCH ROLLER - CAPACIDAD 62” - EVANS
PARTE: 12540 - PINCH ROLLER - CAPACIDAD 62”
- EVANS
USADA - BUENAS CONDICIONESCapacity with Solid Top and SegmentedBottom RollerMax.Width: 62"Feed rate 50 Feet Per MinuteSafety Gates on in-feed and out-feed
sidesWorks with Contact Adhesive or PVA's
white glueHeavy Duty Construction1/2 Hp, 8 Amps 110V MotorWorking Height: 30.5"Max. Thickness: 2"Air Requirement: 100 PSI
Foot Print:
74" x 28"
AMXmachinery
AFILADORA DE CUCHILLAS RECTAS – INDUSTRIAL - 1000 MM
PARTE: 4MV-PX1000 – AFILADORA DE CUCHILLAS
RECTAS – INDUSTRIAL - 1000 MM
Nueva con garantía
Technical
features:
Mini-PLC
controlling automatic downfeed, spark-out and downfeed right or left and right
Heavy
duty grinding motor 2,2 k W (3 HP) - 2800 RPM;
Tilting
head to grind hollow surfaces;
Carriage
run guides covered with replaceable hardened steel guides;
90°
rotating knife-mounting chuck;
Supplied
with stepped blocks to grind 4 overlapping planer blades s...
AMXmachinery
REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
PARTE:
2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
NUEVA CON GARANTIA
Very similar to our 6 x 8
This automatic machine is
equipped with a powered hold-down and an innovative powered belt return, which
is self adjusting and offers operators the ability to fine-tune the return belt
height and angle to fit your specific mix of products.
When setting the sawblade to
the desired board thickness, the feed belt conveyor and the return belt are ...