Identificador: 162
Abierta
ID de articulo : # 162 se ha agregado a su lista de deseos.
Descripción
PARTE: 3UD-CP48X25T-2 – PRENSA FRIA – CAPACIDAD 1100 X 1100 MM X 2 – 25 TON X 2
Nueva con garantía
|
MODELO |
3UD-CP48X25T-2 |
|
WORKING TABLE SIZE |
1100 X 1100 MM X 2 |
|
MAXIMUM PRESSURE WORKIG TABLE |
25 TON X 2 |
|
MAXIMUM OPEN DISTANCE PRESS PLATE |
1000/1250 MM |
|
OIL CYLINDER |
90 MM X 2 PCS |
|
HYDRAULIC MOTOR POWER |
4 KW |
|
DIMENSIONS |
2700 X 1100 X 2860 MM |
|
NET WEIGHT |
2400 KG |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHO
PARTE: 12660 - SIERRA PARA PANELES CON AISLAMIENTO - PANELES - 8" ALTO - 48" ANCHOUSADA - MUY BUENAS CONDICIONES
8" hight
max cut
Variable speed travel
90" cut at 90 degrees
carriage travels on heavy rails
was used to cut styrofoam panels
can be used to call all kinds of materials by changing the blade
Dimensions 168L x 48W x 79 HighMade
in the USA
It
typically designed to cut structurally insulated panels but you could pretty
much cut any material.
It
is desig...
AMXmachinery
TALADRO MULTIPLE 21
PARTE # 1VT-ALFA21CLASSIC - TALADRO MULTIPLE 21 BROCASNUEVO CON GARANTIACantidad de mandriles: 21Peso neto aproximado: 264 KgDistancia entre centro de mandriles: 32 mmDistancia entre el primer y último mandril: 640 mmProfundidad máxima de taladrado: 75 mmDimensiones de la mesa: 860 x 500 mmDimensiones máximas de la pieza: 800x3000 mmVelocidad de los mandriles: 2800 r.p.mFuerza del motor: 2.5 H.P.Presion de aire requrida: 6.8
AMXmachinery
LAMINATE SLITTER
PARTE # 2EV-5031 - LAMINATE SLITTER - EVANS 5031Laminate Slitter, 31" capacity- 110 Volt, 1 Ph., 1/3 HPStandard Features:- 31" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- 36” Working Height- Crated weight 865 LBS. Shipping dimensions 68” long X 54” wide X 49” highOptional:- 220 Volt 50 Hz (export)
-500x500.png)
AMXmachinery
TROMPO CON ALIMENTADOR CNC
PARTE # 2AM-540 - TROMPO CON ALIMENTADOR INTEGRADO - CNC - PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5hp 208-230v 3phShaper Speed: 4000 to 7000 rpmSpindle Size: 1 1/4"Feed Speed: Variable to 30 fpmConveyor: 6" wideMax. Part Thickness: 2"Floor Space: 55"w X 38"dPlantilla Centradora para curvas - opcionalNew CNC controlled Model 540 shaper is based on the Model 390 - a proven, reliable workhorse for over 10 years. The 540 was designed to machine arched panels and rails for cabinet...