Identificador: 1630
Abierta
ID de articulo : # 1630 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 1AM - EXTRACTOR TUBOAXIAL DIRECTO
Carcaza de acero al carbón, pintada con pintura electrostática y horneada. Aspa de aluminio anti-chispa. Accionado por acoplamiento directo a un motor eléctrico.
Características:
– Diámetro de aspa desde 16″ hasta 26″.
– Motores en voltaje 127/220V. y 220/440V.
– Volúmenes de aire: 4,200 hasta 18,725 PCM. Presión desde 0.2″ hasta 2.5″ columna de agua.
Usos:
Procesos comerciales e industriales, torres de enfriamiento, extracción de humo, gases en estacionamientos, viveros, etc.
|
Modelo
|
Potencia
HP |
Volumen
PCM MC/HR |
|
|
XTAD-16 |
1/2 |
4,200 |
7,136 |
|
XTAD-20 |
3/4 |
8,170 |
13,880 |
|
XTAD-24 |
1 1/2 |
14,530 |
24,686 |
|
XRAD-26 |
2 |
18,725 |
31,814 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA CINTA 24" - 3HP
SIERRA CINTA 24" - 3HP 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design...
-500x500.png)
AMXmachinery1
MESA DE MONTAJE - COMBINADO MARCO FRONTAL Y PUERTAS
PARTE: 2RI-R475EA - MESA DE MONTAJE - COMBINADO MARCO FRONTAL Y PUERTASDescription:Frame assembly system for doweled, mortise and tenon, or screwed together frames and cabinet doors. Screwed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. ...
AMXmachinery1
PARTE: 2CK-MX350MR - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350MR - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILLEntry-level machine with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system whic...
AMXmachinery1
ROUTER DE PEDESTAL - 7.5 HP
PARTE: 2CK-SR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a s...