Identificador: 1692
Abierta
ID de articulo : # 1692 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-PH36-2 - MESA DE TIJERA - 3' x 6'
Is strongly built with a massive steel frame that provides maximum durability and is capable of lifting up to 4400 lbs. It is hydraulically operated and controlled by a foot pedal for operator convenience. The PH36-2 is adjustable in height from 12” up to 59”. It is ideal for staging material for feeding into various woodworking machines like sanders, glue spreaders, panel saws, ripsaws, and more.
- 4400 lifting capacity
- 3’ x 6’ deck size
- 12” to 59” lifting capacity
- Robust welded steel frame
- Powerful 2HP hydraulic motor for raising & lowering the scissor liftConvenient foot pedal operation
|
Deck Size |
35” x 71” (900 x 1800 mm) |
|
Lowered Height |
12” (300 mm) |
|
Raised Height |
59” (1500 mm) |
|
Travel |
47” (1200 mm) |
|
Motor |
2 HP |
|
Capacity |
4400 lbs (2000 kgs) |
|
Electrics |
115 Volt – Single phase |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES RECTOS
PARTE: 4ST-TR 500 MATRIX - SIERRA OPTIMIZADORA - CORTES RECTOSAUTOMATIC CROSSCUT SAW WITH ELECTRONIC PUSH-FEEDMATRIX, A STROMAB PHILOSOPHY Is a crosscut saw electronically pusher-controlled with complete optimisation and defection of wood.An optimal solution for all 90° up-cutting requirements, it can work with either single bars or packs.The push-feed is built with a rack and pinion feed system and brushless motor to ensureuncompromised positioning and maximum cutting accuracy.The software ar...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...
-500x500.jpg)
AMXmachinery1
MOLDURADORA - 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
PARTE: 2CK- LMC-518S - MOLDURADORA
- 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
SPECIFICATIONS
Thickness of material
.4”(to ¼” optional) to 5”
Width of material
.6” to 7” (8” optional)
Min lenght of material
8” (butt fed)
Axial Adjust (side heads)
.8” (20 mm)
Axial Adjust
(top/btm heads)
.8” (20
m...
AMXmachinery1
SIERRA CINTA 24" - 2 EN 1- 5HP
PARTE: 2CK-HB600A - SIERRA CINTA 24" - 2 EN 1- 5HP Is heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design tha...