Identificador: 2335
Abierta
ID de articulo : # 2335 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
SIERRA CINTA 24" - 2 EN 1- 5HP 2CK-HB600A
Is heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum maintenance.
- 2-in-1 bandsaw can run up to a 2” wide blade for resawing and down to a ¼” for curve cutting
- Cast iron saw wheels are precision machined and laminated with rubber for accurate blade tracking and slippage prevention
- Cast iron worktable is precision ground and can tilt to 45o
- Blade tension is conveniently adjusted by means of a handwheel and tension is shown by a scale for accurate tension setting.
- Heavy gauge steel frame ensures vibration free cutting
- Upper and lower guide assemblies with Bakelite side guides to ensure cool running of the saw blade and a back guide thrust bearing
- Micrometric adjustment to upper guide by rack and pinion
- Foot brake for quick stopping of the blade
|
Saw wheel diameter |
23 ½” |
|
Table size |
31 ½” x 23 ¾” |
|
Table tilting |
0° – 45° |
|
Throat capacity |
22-7/8″ |
|
Height capacity |
13 ¾” |
|
Width of wheel |
2″ |
|
Blade speed |
710 RPM (4458 FPM) |
|
Blade length |
173-5/8″ ~ 176 ½” |
|
Blade width |
¼” ~ 2″ |
|
Motor |
5 HP |
|
Dust hood diameter |
4” x 2 |
|
Net weight |
748 lbs. |
|
Gross weight |
990 lbs. |
|
Machine size (LxWxH) |
42″ x 31″ x 81″ |
|
Packaging size (LxWxH) |
85″ x 25″ x 43″ |
|
Electrical |
230/3/60 = 12.4 Full Load Amps 575/3/60 = 4.5 Full Load Amps |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS - AIRE CALIENTE
PARTE: 2SS-EZ 60HA - ENCHAPADORA DE CANTOS - AIRE CALIENTEOur hot air edgebander applies your preferred choice of preglued edgebanding. Reduce the amount of panels discarded due to unsatisfactory edge banding installation. It features electronic variable speed control, digital temperature control, electromagnetic end cutters, an accutrim edge trim system and more. The innovative design of this American-Made machine makes it easy to use and provides a very dependable edgebanding solution. This ma...
-500x500.png)
AMXmachinery1
LIJADORA - 1HP
PARTE: 2MK-LDF - LIJADORA - 1HPCan handle a huge variety of tasks. It has a 6”x 11.5” belt, 9” disc and a 1HP motor. The tiltable table 0º to 45º and 0º to 90º disc will allow you to sand pieces in every angle.Technical InformationTable size6" x 11.5"Table tilt0º to 45ºBlade tilt0º to 90ºDisc9”Belt6”x 48”Belt speed1836 SFPMDisc speed2510 RPMMotor Specs1 HP 1 phase: 110 V – 8 AWeight134 Lbs.
-500x500.jpg)
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P24HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...
AMXmachinery1
TALADRO MULTIPLE - HORIZONTAL
PARTE: 2CK-BM-301FEATURES:Motor and drilling head mounted on carriage, sliding on parallel bars with pneumatic movement.Come with adjustable two spindle drill head.Pneumatic work clamp to firmly hold workpieces.Machine operation activated by shrouded foot pedal.Cast iron work table with miter gauge for angled holes.Screw rise and fall adjustment of work table for varying timber thicknesses.Enclosed sheet steel floor stand supporting the machine.
Table size
400 x 2...