Identificador: 1698
Abierta
ID de articulo : # 1698 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-DT-1128A
|
Range of cutter diameter |
1” to 6” (changeable) |
|
Table diameter |
18” |
|
Table speed |
1.5 ~ 4.0 RPM (4 speeds) |
|
Spindle diameter |
30 mm |
|
Spindle speed |
9000 RPM |
|
Cutter size |
100 mm |
|
Spindle height |
4” |
|
Follower roller diameter |
100 mm x 1 |
|
Table drive motor |
1 hp |
|
Spindle motor |
5 HP x 1 |
|
Working speed |
5~6 times/minutes |
|
Net weight |
1,000 kgs |
|
Gross weight |
1,100 kgs |
|
Packing size |
230” x 160” x 210 cm |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX340Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who does not require pre-milling.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick ch...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
ENCHAPADORA DE CANTOS - 230V, 1-3 FASES
PARTE: 2CK-MX340MIs an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the ideal edgebanding solution for small worksho...
-500x500.jpg)
AMXmachinery1
EXTRACTOR VENTILADOR TUBOAXIAL CON BASE
PARTE: 1AM - EXTRACTOR VENTILADOR TUBOAXIAL CON BASEPara uso de ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.Carcasa tubular fabricada en acero al carbón con aplicación de pintura electrostática y horneada. Rejilla de protección electro soldada. Hélice de aluminio anti-chispa.Características:– Aspa con diámetros de 16,20, 24 y 26″.– Volúmenes de aire desde 4,200 hasta 18,725 PCM.Usos:– Ventilación directa sobre maquin...