Identificador: 172
Abierta
ID de articulo : # 172 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER JOINT
Features:
It performs cut off, burrs trimming, and moulding functions.
Two 4" D x 5" L max. tenon cutters, cope spindle accepts general shaper cutter. Suited for cutting tenons, finger joints for window or doorframe and general joint-tenon.
Hand, manual operated clamping and feeding of stock.
First the trim saw to cut off the end of stock evenly.
Then two moulding, tenon spindles are mounted at the rear of saw enable machine performs edge moulding.
Since each head is adjusted independently, a wide variety of tenon can be cut.
At the end the cope spindle provides 6000 RPM cutting which allows it to feature a spindle sharper function.
All operations can be accomplished in a single pass of feeding, high efficiency is assured.
Powerful industrial motor for maximun cutting capacity.
Precision sealed long-life bearing.
Heavy cast iron frames and table for durability usage.
|
SPECIFICATIONS |
|
2TA-SET-60 |
|
CAPACITY |
Max. Length of Cut |
~ |
|
Min. Length of Cut |
5" |
|
|
Max. Width of Cut |
17" |
|
|
Max. Clamping Thickness |
4" |
|
|
TRIM SAW |
Saw Blade Dia. |
8" ~ 10"x 1 |
|
Saw Arbor Dia. |
1" |
|
|
Saw Blade Speed |
4000 RPM |
|
|
Saw Head Tilt |
NO |
|
|
TENONER HEAD |
Spindle Shaft |
1" Dia. Taper x 4" L x 2 |
|
Spindle Speed |
4000 RPM |
|
|
COPE HEAD |
Spindle Speed |
3600 RPM |
|
Spindle Shaft |
1" Dia. x 4" L |
|
|
Spindle Tilt |
NO |
|
|
TRAVERSE |
Saw Longitudinal Travel |
3" |
|
Saw Vertical Travel |
3" |
|
|
Carriage Cross Travel |
20" |
|
|
MOTOR |
Saw & Tenoner Head |
3 HP x 1 |
|
Cope Head |
3 HP x 1 |
|
|
WEIGHT |
N.W. |
990 LBS |
|
|
G.W. |
1200 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PEGADORA CANTO CHAPA - ESPESOR 0.35 - 1.5 mm
PARTE # 3NN-VENEERPLUSG1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integradoMachine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 45 m/min.Electric Power：approx. 8.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1200 mmDimensions (L x W x H)：2200 x 2100 x 1600 mmNet Weight：approx. 1500 kgColor：RAL 8019 / R...
AMXmachinery
TORNO COPIADOR – ASIMETRICO - 4 ESTACIONES CON PULIDORA - BALESTRINI
PARTE: 12361 – TORNO COPIADOR – ASIMETRICO - 4 ESTACIONES
CON PULIDORA - BALESTRINI
USADA – BUENAS CONDICIONES
AMXmachinery
LIJADORA DE BANDA Y DISCO DE BANCO
PARTE # SIL-DC-BDS69-B - LIJADORA DE BANDA Y DISCONUEVA CON GARANTIAMOTOR: 1 HP, 110V, 60 Hz, 1 FASEDIMENSIONES DE LA MESA: 7" X 16"DIMENSIONES DE LA MESA DEL DISCO: 6-1/2" X 10"DIAMETRO DEL DISCO LIJADOR: 9"DIMENSIONES DE LA BANDA LIJA: 6" X 48"INCLINACION DE LA MESA: 45 GRADOSPESO: 35 KGSEMPAQUE: 1 CAJA
AMXmachinery
PARTE: 10385 - ASERRADERO ESTACIONARIO - WOODMIZER - LT-300
PARTE: 10385 - ASERRADERO ESTACIONARIO - WOODMIZER - LT-300En muy buenas condiciones de operaciónManufactura 2001Motor eléctrico 30 HPCapacidad de troceria hasta 30 pulgadas diametro x 22 pies de largo Maquina en MexicoExtension para aserrar hasta 20 pies de largoRodillos hidraulicos para mover los trozos hacia adelante y hacia atras para ajustar el corteOPCIONAL:Deck para trozos - Cadena alimentadora de troceria de 10 mts de largo aproximadamente y banda de salida de las tablas.Video1: https...