Identificador: 1726
Abierta
ID de articulo : # 1726 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-JDT65
- Ideal for drawer production and furniture parts which require high quality dovetail joints.
- Workpieces are pneumatically clamped to speed up material changeovers
- Equipped with one four-sided template providing four pitches between dovetails.
- Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operation
- Standard pitch 1″, 1 ½”, 2″ and 2 ½”
- Solid carbide single flute eccentric dovetail bit controls the fit of the joint
- 18500 RPM spindle for superior cut quality
FEATURES
- Max. workpiece size 59″ x 16 ½”
- Workpieces are clamped by air clamps
- Equipped with an indication bar for indicating cutting position
- Tenon and mortise depth are conveniently adjusted according to the thickness of workpiece
- The spindle accommodates 12 mm TCT eccentric cutter
- Enclosed base
- Magnetic switch with thermal overload protection
|
INCH
|
METRIC
|
|
|
Minimum workpiece size |
7.9″ x 2.4″ |
200 x 60mm |
|
Maximum workpiece size |
59″ x 16.5″ |
1500 x 420mm |
|
Minimum dovetail height |
3/16″ |
5mm |
|
Maximum dovetail height |
0.71″ |
18mm |
|
Minimum front thickness |
0.28″ |
7mm |
|
Maximum front thickness |
2.36″ |
60mm |
|
Minimum side thickness |
0.28″ |
7mm |
|
Maximum side thickness |
2.36″ |
60mm |
|
Number of spindles |
1 |
|
|
Spindle speed (RPM) |
18500 RPM |
|
|
Center spacing of dovetails |
1″, 1.5″, 2″, 2.5″ |
|
|
Table height from floor |
46.5″ |
1180mm |
|
Dust collection ports diameter |
front 2.5″, rear 4″ |
front 63.5mm, rear 100mm |
|
Air pressure requirement |
6 bar |
|
|
Motor |
1 HP |
|
|
Electrics |
230/1/60 = 8.0 FLA |
|
|
N.W. / G.W. |
440 lbs / 510 lbs. |
200 kgs / 223 kgs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
LIJADORA DE MOLDURAS
PARTE: 2LA-150 - LIJADORA DE MOLDURASThis basic machine fills the need for a lower cost profile sander to sand raised panels, door edges and work pieces that do not require a tilting arbor. It features an inverter controlled 3 phase motor, variable speed, and vertical adjustment.lower cost profile sander
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...
AMXmachinery1
PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12" ANCHO
PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12"
ANCHONueva con garantía4’ infeed, 6’ outfeed for easy gluing applicator setup.Grooved rubber roller for water-based wood working glue spreader.Removable stainless steel conveyor belt, glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The glue applicator and conveyor are driven by industrial 1/2 HP total enclosure motor.All comp...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2MK-CBC.MR - ENCHAPADORA DE CANTOS Has a built-in retractable extension table providing a work area 3x times longer whenever opened, it is perfect for long pieces such as doors and panels and it has 6 speeds allowing the operator to work as fast as he wants.WORK AREAWhenever opened the extension tables will give you 3x the regular work area of the machine.6 PARAMETERSWith 6 speeds to chose from the feeder switch will work on your desired velocity.Technical InformationElectrical specs1 Ph...