Identificador: 1746
Abierta
ID de articulo : # 1746 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-UFO102B
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- 3HP generating 1883 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- CSA / UL magnetic starter included
KEY ADVANTAGES
- 3HP Motor
- 1883 CFM
- 6” main inlet with removable outlet with (3) 4” ports
|
CFM |
1883 CFM |
|
Motor |
3 HP |
|
Main inlet diameter |
6″ |
|
Connector inlet diameter |
(3) 4″ |
|
Bag Volume |
10.48 cubic feet |
|
Static pressure of water |
9.26 inch |
|
Top bags (2) |
18.9″ x 31 ½” |
|
Bottom bags (2) |
18.9″ x 31 ½” |
|
Electrics |
230/1/60 = 17 Full Load Amps |
|
Net weight |
169 lbs |
|
Shipping weight |
180 lbs |
|
Shipping dimensions |
48″ x 23″ x 23″ |
|
Noise Level |
80dB |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 PULGADAS
PARTE: 2TA-WG-2502H - ASTILLADORA - HORIZONTAL - 24 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutting...
AMXmachinery1
SIERRA MULTIPLE - 4 A 6 SIERRAS MOVIBLES
PARTE: 2CK-MRS610MFEATURESThe Main Frame is Cast IronHD Precision Straight Line Feeding caterpillar Chain typeFully Programmable Position sets or Infinitely variable foot pedal position setUser friendly Touch Screen controlQuick Saw Blade positioning by Servo MotorBlade positioning by Electronic Joystick Control (Efficient & Quick) or the touch screen controlsEquipped to shift 4 saws independently or 2 saw per shifter (optional as a cluster) on the with a single or bank of saws on the inside or ...
AMXmachinery1
PARTE: 2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESOR
PARTE:
2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92”
ESPESORNUEVA CON GARANTIA
2 OPCIONES: 230/1/60 - 460/3/60Can produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. The user-friendly controls and operation make will all...