Identificador: 1777
Abierta
ID de articulo : # 1777 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-D405M-8 - SIERRA ESCUADRADORA - 2600 MM
- Precision anodized aluminum sliding table with prismatic rollers running on precision ground steel guides for smooth and effortless table movement
- Crosscut miter fence with (2) flip stops for accurate panel sizing and angular cuts
- Manual blade rise, fall, and tilting with convenient pointer for blade angle display
- Heavy duty rip fence runs on round cylindrical solid steel guide with manual adjustment and micro adjustment knob
- Overarm safety guard with quick change system for changing between straight and bevel cutting guards
KEY ADVANTAGES
- Powerful 7 ½ HP main motor for 3 Phase or 5 HP main motor for Single Phase, with separate 1 HP scoring motor
- Manual saw blade rise/fall & tilting, conveniently located on the operator side of the machine
- Heavy-duty outrigger for strong support of workpiece during cutting operations
- Dual inch and metric scales for both rip and crosscut fences
- Manual lateral and vertical scoring adjustment by externally mounted handles for operator convenience
- Eccentric hold down clamp, table return handle, and wedge for solid wood ripping included
- Overhead saw blade guard with built in dust port included (CE-type)
|
|
INCH |
METRIC |
|
Sliding table dimension |
102.4″ x 14.9″ |
2600 x 378 mm |
|
Cast iron table |
21.6″ x 35.3″ |
548 x 896 mm |
|
Extension table (rear) |
37.5″ x 35.3″ |
952 x 896 mm |
|
Extension table (front) |
12.6″ x 32.7″ |
320x 830 mm |
|
Table size |
59″ x 68″ |
1500 x 1726 mm |
|
Round rail |
1.97″ |
50mm |
|
Maximum main saw blade dia. |
16″ |
400 mm (16″) |
|
Main saw bore |
30mm |
|
|
Max. cutting height at 90° (355mm) |
4.13″ |
105 mm |
|
Max. cutting height at 45° (355mm) |
2.76″ |
70mm |
|
Main motor power |
7.5 HP (3ph) / 5HP (1ph) |
5.5 kW (3ph) /3.7 kW (1ph) |
|
Main blade speed (3) |
3000/4000/5000 RPM |
|
|
Scoring saw blade |
120 mm |
|
|
Scoring saw blade bore |
20mm |
|
|
Scoring blade motor power |
1 HP |
0.75 kW |
|
Scoring blade speed |
8000 RPM |
|
|
Cutting width |
51.2″ |
1300 mm |
|
Cutting width adjustment |
Manual |
|
|
Main saw blade tilting adjustment |
Manual (0°~45°) |
|
|
Main saw height adjustment |
Manual |
|
|
Scoring saw adjustment |
Manual |
|
|
Dust ports (machine / guard) |
4.72″ / 2.5″ |
120mm / 64 mm |
|
Machine total weight |
1612 lbs. |
733 kgs |
|
Electrics |
230/3/60 = 26.2 Full Load |
|
|
Electrics |
230/1/60 = 36 Full Load Amps |
|
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
PARTE:3HO-HT800 - CANTEADORA AUTOMATICAThe single-sided edge banding machine is designed for bonding rectangular workpieces with various edge materials: PVC, ABS, acrylic.Feed Speed12/15/18 m/minBanding Tape Thickness0.4-3 mmBanding Tape Width12-65mmPanel Thickness10-60 mmPanel Length≥80 mmPanel Width≥60 mmFeeding Motor1.5kwGluing Motor0.75kwEnd Trimming Motor0.37kw*2Fine Trimming Motor0.75kw*2Polishing Motor0.18kw*2Pressing Beam Lifting Motor0.37kwWorking air pressure0.6-0.8mpaWeight1050kgD...
AMXmachinery1
EXTRACTOR DE POLVOS - 10 HP
PARTE: 2EX-DB-100 - EXTRACTOR DE POLVOS - 10 HPOur dust blowers are made up of a heavy duty dynamically balanced vaneaxial fanwith safety guards on all inlets. The steel impeller is mounted directly to the shaft ofthe stand-mounted motor. Motors are available from 5 to 25 horsepower, 3 phaseelectric and have options for magnetic starters and remote control. Single phaseelectric motors are available for blowers up to 7.5 horsepower.Magnetic starter included.See comparison chart below for specif...
AMXmachinery1
CONECTOR RAPIDO - 21"
PARTE: 2EX-WI-W1038 - CONECTOR RAPIDO - 21"Designed to attach to the end of a 4″ flexible hose and then press-on to any 4″ outer diameter dust hood for a quick and easy friction fit. Ideal for use with smaller capacity, mobile dust collectors to service multiple machines. Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used. Stays secure and airtight
AMXmachinery1
TALADRO BASTIDORES - POCKET HOLE - 1 BROCA
PARTE: 2SS-SPM301 - TALADRO BASTIDORES -POCKET HOLE - 1 BROCAUnlike others of its kind, it features cam-driven action providing fast, smooth cutting action under complete mechanical control throughout the machine cycle. it's mechanical linkage allows the pilot drill and router bit to cut at the same time, reducing cycle time without sacrificing cut quality. Simple back fence, stop rail, and depth adjustment make setups and adjustments quick and easy. The built-in analog depth gauge allows changi...