Identificador: 1825
Abierta
ID de articulo : # 1825 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2TA-WG-1504V - ASTILLADORA - VERTICAL - 15 X 4 PULGADAS
Features:
- A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.
- Excellent wearing ability and impact-resistant for time & labor saving.
- Large busting capacity and easy feeding system.
- The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage
- Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of waste with maximum durability.
- Movable screen for changing the size of chips and easy to clean-up.
- Enery efficient & quiet running industrial motor
|
SPECIFICATIONS |
WG-1504V |
WG-2535V |
WG-4751V |
|
Entrance Capacity (L x W) |
15-3/8" x 4" |
25" X 35" |
47" x 51" |
|
Rotary Cutter (Sets) |
18 |
30 |
96 |
|
Stationary Cutter (Sets) |
4 |
4 |
6 |
|
Cutter Speed (RPM) |
680 |
85 |
85 |
|
Standard Finish Size or Option |
1/2" |
1/2" |
1/2" |
|
Cutter Head Motor |
20 HP |
30 HP |
60 HP |
|
Feed Motor |
-- |
-- |
1 HP x 2 |
|
Dust Hood |
8” x 1 |
8” x 1 |
8” x 1 |
|
Machine Size (L x W x H) |
56" x 50” x 32" |
87" x 52” x 75" |
106" x 75" x 83" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
EXTRACTOR VENTILADOR TUBOAXIAL CON BASE
PARTE: 1AM - EXTRACTOR VENTILADOR TUBOAXIAL CON BASEPara uso de ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.Carcasa tubular fabricada en acero al carbón con aplicación de pintura electrostática y horneada. Rejilla de protección electro soldada. Hélice de aluminio anti-chispa.Características:– Aspa con diámetros de 16,20, 24 y 26″.– Volúmenes de aire desde 4,200 hasta 18,725 PCM.Usos:– Ventilación directa sobre maquin...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
-500x500.png)
AMXmachinery1
ENGANCHADORA DE METAL PITTSBURG
ENGANCHADORA DE METAL PITTSBURG PARTE: PL-20E20 gauge capacity: can handle sheet metal up to 20 gauge, making it suitable for a wide range of applications.Creates tight, interlocking joints between two pieces of sheet metalMade with high-quality materials and construction for durability and longevityMaintenance-friendly design: The machine is designed for easy maintenance, with quick-access panels that allow for easy cleaning and lubrication.Compact and portable...
AMXmachinery1
SIERRA MULTIPLE - 100 HP
PARTE: 2CK-MRS155FEATURESExtra Robust 100 HP motorGreat Cutting Thickness of 155mm (6.1″)Continuous duty 100 HP arbor motor allows deep cutting speeds of thick lumberMRS-155 has a massive cast iron base, composing the majority of total machine weight of 2700kg. This design provides incredible absorption characteristics under deep cutting, especially while performing thick lumber ripping with a multi-blade set upPrecision chain and rails (dip chain) system facilitates accurate cutting operation...