ID: 1832
Open
.jpg)
.jpg)
.jpg)
.jpg)
Description
PARTE: 2TA-WG-4751V - ASTILLADORA - VERTICAL - 47 X 51 PULGADAS
Features:
- A specially designed with push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.
- Excellent wearing ability and impact-resistant for time & labor saving.
- Large busting capacity and easy feeding system.
- The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage
- Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of waste with maximum durability.
- Movable screen for changing the size of chips and easy to clean-up.
- Enery efficient & quiet running industrial motor.
|
SPECIFICATIONS |
WG-1504V |
WG-2535V |
WG-4751V |
|
Entrance Capacity (L x W) |
15-3/8" x 4" |
25" X 35" |
47" x 51" |
|
Rotary Cutter (Sets) |
18 |
30 |
96 |
|
Stationary Cutter (Sets) |
4 |
4 |
6 |
|
Cutter Speed (RPM) |
680 |
85 |
85 |
|
Standard Finish Size or Option |
1/2" |
1/2" |
1/2" |
|
Cutter Head Motor |
20 HP |
30 HP |
60 HP |
|
Feed Motor |
-- |
-- |
1 HP x 2 |
|
Dust Hood |
8” x 1 |
8” x 1 |
8” x 1 |
|
Machine Size (L x W x H) |
56" x 50” x 32" |
87" x 52” x 75" |
106" x 75" x 83" |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
BARRENADORA HORIZONTAL - 1 HUSILLO
PARTE: 2RI-R130 - BARRENADORA HORIZONTAL - 1 HUSILLODescription:Designed for a dedicated and accurate boring center with single, double or triple spindle boring capability. Stile and rail boring set-up features help eliminate costly mistakes, rejected parts and increase production efficiency. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.Standard Features:Single spindle head7/16-14 Female Thr...
AMXmachinery1
EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA
PARTE: 1AM - EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA-FABRICADAS EN ACERO INOX. P3, GRADO ALIMENTICIO - PARTE FRONTAL, LATERALES, TECHO Y FILTROS EN LAMINA
CAL. 20 CON GOTERÓN EN LAMINA CAL. 18 - SOPORTA FILTROS Y RESPALDO EN LAMINA GALVANIZADA - INCLUYE FILTROS TIPO LABERINTO
- INCLUYE CAPELOS PARA ILUMINACIÓN - NO INCLUYE DUCTERÍA NI EXTRACTOR
Cantidad de
Capelos
Largo
1
1 m
2
1.5 m
...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
-500x500.png)
AMXmachinery1
PARTE: 2GM-EPS-0810M - GUILLOTINA MECANICA - 8 PIES LARGO X 10 GA
PARTE: 2GM-EPS-0810M - GUILLOTINA
MECANICA - 8 PIES LARGO X 10 GAShop our 8 foot mechanical shears that are capable of cutting up to 10 gauge mild steel and 14 gauge stainless. Our sheering machines are designed as a low maintenance design with an array of features that will add value to any machine shop. ISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squaring arm wit...