Identificador: 1869
Abierta
ID de articulo : # 1869 se ha agregado a su lista de deseos.
Descripción
PARTE: 12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO - MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions Foot print of line 52' x 15'
Estimated Weight 10,000 Lbs (approx)
DESCRIPTION:
HPC Double Sided Automatic finger joint line
Station 1 squares one end and cuts initial finger joint
Station 2 squares the other end, cuts finger joint, and applies glue.
Station 3 assembles and clamps the pieces
Station 4 cuts to length from 8' - 20'
The information provided was gathered from literature, internet & physical inspection.
It is thought to be accurate; but not guaranteed.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – OMAL VELOX 1300
PARTE: 12062 – CNC TALADRO, ENGOMA, INSERTA – OMAL VELOX 1300USADA – MUY BUENAS CONDICIONESIN MINT SHAPEMFG 2014 BUT WAS SOLD NEW JAN 2016INCLUDES LASER PART SENSOR2 ZONE MACHINE WITH 51" WORKING AREAA LASER SENSOR AUTOMATICALLY MEASURES THE WIDTH OF A PANEL AND CALCULATED THE POSITION AND NUMBER OF DOWELS BASED ON A PROGRAM FILETESTEDVIDEO 1: https://vimeo.com/438240935
AMXmachinery
PARTE: 12526 - CENTRO DE TRABAJO CNC - ROVER GOLD 1232
PARTE: 12526 - CENTRO
DE TRABAJO CNC - ROVER GOLD 1232
USADO - MUY BUENAS CONDICIONESNumerically
controlled machining centre ROVER GOLD 1232
Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis)
Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm
WORKING TABLE
6
ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum
6
back stops of 115 mm stroke and 26 mm height spacers
...
AMXmachinery
GATO DE PISO 3 TONS
PARTE: 1SL-DC-FJ3T - GATO DE PISO - 3 TONSCAPACIDAD 3 TONSALTURA MINIMA: 141 MMALTURA MAXIMA: 475 MM
AMXmachinery
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
COMO NUEVO - SIN USARPARA SIERRAS CINTAS DE 1" A 1-1/2" CON 7/8" DE ESPACIO ENTRE LOS DIENTES (TOOTH SPACING)VOLTAGE 115/230 VAC
FRECUENCY: 50 - 60 HZ
PHASE 1
FULL LOAD AMPS: 5.0 / 2.5 A
DIAGRAM # 5520-989MANUAL DEL USUARIO INCLUIDO