Identificador: 1869
Abierta
Descripción
PARTE: 12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO - MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions Foot print of line 52' x 15'
Estimated Weight 10,000 Lbs (approx)
DESCRIPTION:
HPC Double Sided Automatic finger joint line
Station 1 squares one end and cuts initial finger joint
Station 2 squares the other end, cuts finger joint, and applies glue.
Station 3 assembles and clamps the pieces
Station 4 cuts to length from 8' - 20'
The information provided was gathered from literature, internet & physical inspection.
It is thought to be accurate; but not guaranteed.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA - GRABADORA DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
PARTE: 12243 – PRENSA - GRABADORA
DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
USADA – BUENAS CONDICIONES
Mfg
1981
Electric 230 volt, 60 cycle, 3 phase
Press
width 450mm (17.71")
Material
max width 500mm (19.68")
Material
Speed 200-1000 Meters per hr. (650 -
3200 ft)
Engraving
depth 3mm
Dual
propane torch heaters
Includes
Wheels as shown (100 - 250 mm diameter wheels)
Shipping
Footprint: 6 (length) x 6 (width) x 5 (height)
Weight: 25...
AMXmachinery
PARTE: 12624 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 37” ANCHO - POWERMATIC
PARTE: 12624 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 37” ANCHO - POWERMATICUSADA – EXCELENTES CONDICIONES15hp Motor220v, 3phCombination Head37 x 60Variable Speed
AMXmachinery
PARTE: 12444 - MOLDURADORA - 5 CABEZALES - WEINIG U23E
PARTE: 12444 - MOLDURADORA -
5 CABEZALES - WEINIG U23E
USADA - BUENAS CONDICIONES -
AS ISCapacity: 9" x5"Spindle Diameters: 1-13/16"Spindle Configuration: Bottom - 10 HP, Right/Left
- 20 HP, Top - 20 HP, Bottom - 15 HPFeed Motor: 5 HPVariable Speed Feed78" Infeed TableSound/Safety Enclosure460v, 3ph
Year:
2001
AMXmachinery
PARTE: AMX-10166 - EXTRACTOR DE PARED - 17” X 17” - S & P
PARTE: AMX-10166 - EXTRACTOR DE PARED - 17” X 17” - S
& P
USADO MUY BUENAS CONDICIONES
MODELO: HXB-4-400/20
3,600 M3/HR
MOTOR: ¼ HP, 127V, 1 FASE, 2.2 AMP
RPM: 1625
MEDIDAS: 20” X 20” X 10”