Identificador: 1983
Abierta
ID de articulo : # 1983 se ha agregado a su lista de deseos.
Descripción
PARTE: 12395 - ENCHAPADORA DE CANTOS - HOLZ-HER TRIATHLON
USADA - BUENAS CONDICIONES
SPECIFICATIONS
Model 1487 V
Year: 2003
S/N: 150/0-309
Made In Austria
Condition Used
OTHER SPECIFICATIONS
Work Stations
Glue Pot
Buffing
Main Motor
Power: 4.4 kW / 6 hp
Phase: 3
Voltage: 127 / 220 V
Amps: 28.3 / 16.6
RPM: 1430
Operating Pressure: 6 bar
Limit Pressure: 8 bar
With CNC
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
PARTE: 12406 - ASTILLADOR - 75 HP - BAJA VELOCIDAD - WEIMA
Usado - Buenas Condiciones2004
Model WLK 13/75 Low Speed, Hopper StyleBatch
style with 75 HP low speed rotor, top feed hopper, self contained hydraulic
system with hydraulic ram, and controls.
Controls
operate the ram which forces material against the low speed rotor. Controls
vary the hydraulic pressure based upon the load on the rotor motor.
Features
reversible carbide cutters on large diameter rot...
AMXmachinery
GENERADOR - ALTA FRECUENCIA 13 KW
PARTE: 2L0-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KWNew with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using wooden mold instead...
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 10” DIAMETRO - CTD D-45
PARTE: AMX-10079 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 10” DIAMETRO - CTD D-45
USADA - MUY BUENAS CONDICIONES2 pistones pequenos a los lados que se activan antes de que las sierras bajen y suban, para que no se mueva el material a cortarCapacidad de
corte con sierras de 10": 2-1/2" ancho x 3-1/4" alto
También le quedan sierras de 12” para más capacidad de
corteMade
in USATwo
(2) saws fixed at 45° angle (saw heads are adjustable up to 3°)(2) motors, 1.5 HP, 208-230/460V, ...
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...