Identificador: 1997
Abierta
ID de articulo : # 1997 se ha agregado a su lista de deseos.
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
AMXmachinery
Descripción
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on mechanical parts only
Each notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400 lb.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12564 - PRENSA ARMADORA DE GABINETES - 98” ALTO X 55” ANCHO X 24” FONDO
PARTE:
12564 - PRENSA ARMADORA DE GABINETES - 98” ALTO X 55” ANCHO X 24” FONDONueva - Nunca UsadaUHLING - HP3000Vertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel
AMXmachinery
ROUTER CNC - MODEL I
PART # 2TA-I-0408 - ROUTER CNC - MESA 4' X 8' - MOTOR 5 HP - CON MESA DE VACIOPART # 2TA-I-0510 - ROUTER CNC - MESA 5' X 10' - MOTOR 5 HP - CON MESA DE VACIOAll “SERVO MOTOR” driving systemPC base CNC controller is set up to accept standard G code programming formats along with on board conversational applications.User friendly IC Control System powerful closed positioning loop software with Ethernet interface for data transfer from PC.All axis are driven by brushless type high torque AC ser...
AMXmachinery
SIERRA CINTA DE 14" - MOTOR 3/4 HP
PARTE: 1SL-DC-SW1402 - SIERRA CINTA DE 14" - MOTOR 3/4 HPNUEVA CON GARANTIAMOTOR: 3/4 HP, 110/220V, 60 Hz, 1 FASEDISTANCIA DE CINTA A COLUMNA: 345 MMALTURA MAXIMA DE CORTE: 120 MMTAMANO DE LA MESA: 14" X 13-3/4"INCLINACION DE LA MESA: 0 - 45 GRADOSALTURA DE LA MESA: 42"LONGITUD DE LA SIERRA CINTA: 2350 MMANCHO DE LA SIERRA CINTA: DESDE 1/4" HASTA 1/2"PESO: 70 KGSEMPAQUE: 1 CAJA
16,400.00 MXN
AMXmachinery
PARTE: AMX-10169 - LIJADORA DE BANDA - LIJA 590 CM X 6” ANCHO
PARTE: AMX-10169 - LIJADORA DE BANDA - LIJA 590 CM X 6” ANCHO
USADA – MUY BUENAS CONDICIONES
1 LIJA BANDA NUEVA INSTALADA Y 8 LIJAS DE REPUESTO GRANO
150 NUEVAS
MOTOR: 3 HP (2.2
KW), 220/380V, 60 HZ, 3 FASES, 1,710 RPM - CONECTADO A 220V
ARRANCADOR THERMOMAGNETICO 3 HP - NUEVO
TODOS LOS BALEROS NUEVOS: MOTOR, CHUMACERAS, GUIAS MESA,
GUIA PRENSA PULIDORA
MEDIDAS MESA: 76”
ANCHO X 38” FONDO
MEDIDAS TOTALES: 123” ANCHO X 46” FONDO X 61” ALTOVIDEO: https:/...