Identificador: 2077
Abierta
Descripción
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS CONDICIONES
Manufactured in 2015
• 50.5 Total HP
• Spring loaded conveyor pin system
• Spiral insert knife cutterheads with
two sided solid carbide knives
• Digital electronic thickness
adjustment
• 25” Wide x 8” thick capacity
• Inverter variable feed speeds
• Sectional chip breaker and feed roller
before top head
• Removeable bottom head for knife change
• Chain feed drive
• Auto conveyor lubrication
• New replacement cost over $36,000.00
• Currently in storage, will load on truck
• Good condition, As taken from service
Maximum working width 25″
Maximum working thickness 8″
Minimum working thickness 0.315"
Minimum workpiece length 12.2″
Bottom head motor 20 HP
Top planing head motor 25 HP
Feed motor 5 HP
Table elevation motor 1/2 HP
Cutterhead diameter 4"
Knife dimensions 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
Cutterhead speed 5400 RPM
Feed speed (variable) 26-80
FPM Dust ports 2 @ 6”
Table dimensions 27" x 103" (32" from the floor)
Machine voltage
460/3/60 = 63 amps
230/3/60 = 125 amps
Prewired 460
Volt Machine dimensions (LxWxH) 105″ x 45.1″ x 67.7″
Net weight 6600 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA HIDRAULICA 12 TON
PARTE: 1SL-DC-SP12 - PRENSA HIDRAULICA - 12 TONSNUEVA CON GARANTIADISTANCIA DE TRABAJO 3-1/4" A 28-1/4"DISTANCIA ENTRE COLUMNAS LATERALES 16-3/8"
AMXmachinery
POLIPASTO - CAPACIDAD - 5 TONS
PARTE: 12488 - POLIPASTO - CAPACIDAD - 5 TONS
USADO BUENAS CONDICIONES
AMXmachinery
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
PART:
1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE
AND STOPSIDE
ROLLER TABLES Use
with saws, planers, edgebanders, jointers, etc.New
with warranty120
cm (47”) length x 39 cm (15.35”) widthVariable
height 83 - 87 cm (32.5 - 34.25”)Support
large and heavy wood pieces and wood panelsAdjustable
heigh to pair with your current machines7 galvanized steel ball bearing rollers-
1 back guide to avoid material to fall-
1 block stop to make same size ...
AMXmachinery
SIERRA CINTA 10"
PARTE: 1SL-DC-SC10-B - SIERRA CINTA DE 10" - MOTOR 1/2 HP NUEVA CON GARANTIAMOTOR: 1/2 HP, 110V, 60 Hz, 1 FASEDISTANCIA DE CINTA A COLUMNA: 230 MMALTURA MAXIMA DE CORTE: 80 MMTAMANO DE LA MESA: 290 X 290 MMINCLINACION DE LA MESA: 0 - 45 GRADOSLONGITUD DE LA SIERRA CINTA: 1511 MMANCHO DE LA SIERRA CINTA: 9.8 MMPESO: 16 KGSEMPAQUE: 1 CAJA