Identificador: 2241
Abierta
ID de articulo : # 2241 se ha agregado a su lista de deseos.
PARTE: 12522 – LIJADORA DE BANDA ANCHA – 1 LIJA – ANCHO 36” – LAGUNA - CP 60
AMXmachinery
Descripción
PARTE: 12522 – LIJADORA DE BANDA ANCHA – 1 LIJA – ANCHO 36” – LAGUNA - CP 60
USADA - BUENAS CONDICIONES
MOTOR 11 HP, 220V, 1 FASE
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TORNO DESENROLLADOR - ANCHO 54”
PARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”
1 - TORNO DE DESENROLLO DE 54 PULGADAS (4 PIES) SEMI-AUTOMATICO
MARCA IND. G.H. PARA DESENROLLAR TROCERIA DE 4 PIES DE LARGO Y DIAMETRO DE 25
PULG. MAXIMO GROSOR DE .08 HASTA 5.MM ACCIONADO CON CADENAS DE AVANCE Y MOTORES
DE 5,10,15 HP CON CAPACIDAD DE 30 TONELADAS DE DESENROLLO DIARIAS.
AMXmachinery
SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
PARTE:
2TA-CS- 20RL45 – SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
NUEVA
CON GARANTIA
Features:
Adjustable
maximum 45 degree to the right or left or 90 degree angle setting for
semi-automatic, fast cutting.
Semi-automatic
by pneumatic movement cutting.
Auto.
cutting cycle simply operated by foot switch.
Sealed
long-life ball bearings.
Full 10
HP motor for powerful cutting capacity.
Precision
ground cast iron table with heavy metal cabinet st...
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...