Información del vendedor
AMXmachinery
- Registrado Desde:
- 03.03.2020 23:18:57
- Envienos sus comentarios
- n/a
- Ver otras Articulos
Descripción
PART: 2CK-MX340M-E – AUTOMATIC EDGEBANDER
NEW WITH WARRANTY
Compact
design with best-in-class edgebanding result.
The MX340M Automatic Edgebander is an entry-level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX340M can output high-quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
· Compact design makes it the ideal edgebanding solution for small workshops.
· Precise adjustments for optimum edge quality.
· Chain feed system ensures consistent feeding of material for consistent results.
· Available in 230V 1 or 3 phase.
Key Advantages
· PLC control system with LED display and keypad.
· Workpiece is fed by chain.
· Edge coil support plate: Ø 800 mm (31.5″) for PVC/ABS.
· Automatic edge feeding with a thickness capacity of 0.4-3 mm.
· Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
· 2 kg (2.64 lb) Teflon-coated hot-melt glue pot.
· Spring-loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber).
· Heavy-duty pressure beam with extendable workpiece support.
· Heated infeed fence for pre-heating the panel for optimum glue penetration.
· Mechanical digital readouts for convenient and quick adjustment to the working units & thickness.
Operating Panel with LED Keypad
All controls are centrally located in a control panel at the infeed of the machine. The control settings include glue temperature settings, on/off controls for each working unit, and an emergency stop button.
Edge Feeding Coil
Edge feeding is automatic for coil materials with a thickness of 0.4–3 mm. Strips can be fed individually, equipped with a heated infeed fence that pre-heats the edge of the panel for superior glue absorption for a better bond.
Heavy Duty Feed Chain
Material is fed using a feed chain with rubber covered chain pads and two rows of top rubber pressure rollers, which are stagger for maximum material hold-down during machining operations to result in optimum edge results.
Teflon-Coated Glue Pot
The 2.6 lbs (1.2 kg) capacity Teflon-coated glue pot is designed for EVA hotmelt glue. The glue is applied by a roller, and the glue amount is adjustable for optimum coverage.
Guillotine Shear
The guillotine shear can trim coiled material up to 3 mm in thickness. This can be turned off for individual stip feeding.
Pressure Roller
The pressure roller unit consists of one large chrome steel roller and a smaller rubber pressure roller. The pressure rollers ensure the edge is properly adhered to the panel edge the glue bond between the edge. The rollers are adjustable to the edge thickness by referencing from a sample of the edge. This ensures consistent pressure for optimum bonding results.
End Trimming Unit
The end trim saw unit is mounted on high-precision linear bearings, which ensure perfect cutting results. The high RPM saw blades meet any challenge, regardless of edge type & thickness. The blades trace the leading and tail edge of the panel to ensure the exact precision of end cuts. The sawblade turn at 8800 RPM. (2) Blades are 80mm in diameter.
Flush and Radius Trimming Unit
The top and bottom trimmers are spring-loaded and use a tracing wheel to trace the panel's surface. The result is a consistent trimming of the edge according to the panel surface. The rollers also ensure no marking of the workpiece. The knives are capable of flush and radius scraping with 2mm radius knives as standard. They can be adjusted in and out using mechanical digital readouts for repeatable and accurate positioning. The insert knife cutters turn at 10500 RPM.
Radius Scraping Unit
The PVC scraping unit fine-tunes the radius edge and removes knife marks left from the flush trimming unit. It can also remove excess glue.
Buffing Unit
The buffing unit leaves a super finish on ABS and PVC edging and removes any discoloration on the edges, especially when working with dark edge material.
Panel Thickness Setting
Panel thickness adjustment is quick and accurate with mechanical readout.
DESCRIPTION |
INCH |
METRIC |
Feeding speed |
23 FPM |
7 m/min. |
Panel thickness |
0.472~1.77″ |
12~45 mm |
Edge thickness |
0.0158″~0.118″ |
0.4 ~ 3 mm |
Min. panel width |
3 ½” |
90 mm |
Min. panel legnth |
3 ½” |
90mm |
Working table height |
33.5″ |
850 mm |
Dust collection outlet dia. |
2 x 4″ = 800 CFM |
2 x 100 mm = 800 CFM |
Total connected power |
5 HP |
3.8 KW |
Air |
7.06 CFM / 85 - 100 PSI |
200 liters/min / 6 – 7 kg/cm2 |
Max. machine dimensions (LxWXH) |
115″ x 47″ x 48″ |
2921 x 1194 x 1220mm |
Machine weight |
968 lbs. |
440 kgs. |
Shipping dimensions (LxWxH) |
89″ x 29″ x 50″ |
2261 x 737 x 1270mm |
Shipping weight |
1115 lbs. |
507 kgs. |
Electrical requirements |
230/1/60 = 26 amps |
230/3/60 = 16 amps |
Note: 3 mm tooling is not available for the M series edgebanders.
Start-Up & Training:
· Available on request, normal service rates apply.
· The machine must be in place, cleaned, and connected to the electrical/pneumatics with the necessary dust collection hooked up prior to the Technician's arrival.
Note: Tooling and/or other items necessary to operate/test the machine(s) must also be available on startup.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express/Bank Transfer/Direct Debit, Bank Transfer/Direct Debit, Transferencia y Deposito Bancario
Publicar mensaje
PARTE: AMX-10153 - EXTRACTOR DE TUBO - 16” DIAM INTERNO - 18” DIAM EXTERNO - 1 HP
PARTE: AMX-10153 - EXTRACTOR DE TUBO - 16” DIAM INTERNO - 18” DIAM EXTERNO - 1 HP USADO - MUY BUENAS CONDICIONES MOTOR 1 HP, 220/440V, 3 FASES, RPM 1750
AMXmachinery
Chaleco De Seguridad En Malla Color Verde
PARTE: 1SIL-DC-EQ-CHA-MVE - Chaleco De Seguridad En Malla Color VerdeChaleco de seguridad en malla Color verde ReflejanteBies amarillo de alta visibilidadBroche Clic L...
AMXmachinery
SIERRA CIRCULAR 10" - ECONOMICA
PARTE: 1HR-63906 - SIERRA CIRCULAR 10" - ECONOMICA - 80T - ADMIRAL5/8 FLECHA, 7000 RPM - CARPINTERIA - CORTE FINO - DELGADOESPESOR: 0.099 PULGADASTERMINADO FINOACER...
AMXmachinery
SIERRA CINTA 18"
PARTE # SIL-DC-BS0018 - SIERRA CINTA DE 18" - MOTOR 3 HPNUEVA CON GARANTIAMOTOR: 3 HP, 220V, 60 Hz, 1 FASECAPACIDAD DE CORTE: 18" X 11"LONGITUD DE LA ...
AMXmachinery