Identificador: 2426
Abierta
ID de articulo : # 2426 se ha agregado a su lista de deseos.
Descripción
PARTE: 12558 - CENTRO DE MAQUINADO - 2014 HAAS VF-6SS
USADO – MUY BUENAS CONDICIONES
SPECIFICATIONS:
TABLE LENGTH 64"
TABLE WIDTH 28"
TABLE CAPACITY 4,000 lb
X-AXIS TRAVEL 64"
Y-AXIS TRAVEL 32"
Z-AXIS TRAVEL 30"
SPINDLE SPEED 10,000 RPM
SPINDLE MOTOR 30 hp
SPINDLE TAPER CAT 50
TOOL CAPACITY (ATC) 30
ROTARY OR TRUNNION Yes
APPROX MACHINE WEIGHT 22,500 lb
APPROX MACHINE DIMENSIONS 195" X 102" X 130"
EQUIPPED WITH:
HAAS HRT310 ROTARY TABLE
4TH AXIS DRIVE & WIRING
2-SPEED GEARBOX
10,000 RPM SPINDLE
SIDE-MOUNT TOOL CHANGER (30 ATC)
THROUGH-SPINDLE COOLANT
PROGRAMMABLE COOLANT
CHIP AUGER
HIGH-INTENSITY LIGHTING
RIGID TAPPING
USB PORT
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LAMINATE RACK
PARTE # EV-4270 - LAMINATE RACK - EVANS 4270 Pneumatic Laminate Rack- 100 PSI Required- Max 80 sheets 5’ X 12’ standard grade laminate.- Dual level storage area- Crated weight 1640 LBS. Shipping dimensions 81” long X 60” wide X 82” high
AMXmachinery
PARTE: 1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERY
PARTE:
1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERYNueva con garantíaCapacidad de corte máximo: 10” ancho x 5” altoSierra cinta: 131” largo x 1-1/4” ancho - paso 7/8” para
tabletear madera pinoBanda: 160” x 10” anchoMotor principal: 10 HP, 220/440V, 3 fases,
conectado a 220VMotor avance: 2 HP, 220/440V, 3 fases, conectado a 220VMedidas totales: 68” ancho x 80” fondo x 63” alto
Medidas totales de e...
-500x500.jpg)
AMXmachinery
CEPILLO 2 CARAS 16", 24"
PARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HPPARTE # 3GO-GT-610B - CEPILLO 2 CARAS – CAPACIDAD 24” ANCHO – MOTOR 15, 10, 2, ½ HPPARTE # 3GO-GT-610A - CEPILLO 2 CARAS – CAPACIDAD 24" ANCHO – MOTOR 20, 15, 3, ½ HPESPECIFICACIONESPARTE # 3GO-GT-400B - CEPILLO 2 CARAS – CAPACIDAD 16" ANCHO – MOTOR 10, 7.5, 2, ½ 10 HPMotor: 10hp,7.5hp,2hp,1/2hpMaximum width of cut: 405MM Minimum thickness of cut...
AMXmachinery
PART: 1AM-1280-E – PALLET NOTCHER - 9” LENGTH – 40 KNIVE CUTTERHEAD - HEAVY DUTY
PART: 1AM-1280-E – PALLET NOTCHER - 9” LENGTH – 40 KNIVE
CUTTERHEAD - HEAVY DUTY
New with warranty – 6-month warranty on manufacturing defects on mechanical
parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220VMaximum notcher size 9” length x 3” height x 3” depthCutterhead with 40 insert replaceable tip knives cutters for recycled
wood installedOn/Off Switch with magnetic starter
Products specifications are subject to change without notice