Identificador: 4
Abierta
ID de articulo : # 4 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EB-SF-U3R8 - AFILADOR DE BROCAS Y CORTADORES RECTOS UNIVERSAL
Maquina ara afilado para diferentes tipos de cortadores, brocas, para metal, madera, etc
Videos de la maquina: Video 1
Características:
1. Concise and easy, and grind out in a straight line.
2. Strength increase, increase the service life of blade and processing capacity.
3. High grinding accuracy, easy to install, aesthetically pleasing, novel structure, flexible the rotating parts, low noise, small vibration, tool post part bearing, durable, wear-resisting,
4. All kinds of diameters, shapes, Angles of the carving knife according to the proportion of engraving corresponding grinding.
PARAMETERS:
5 types R8 Collects | 0.15''=4mm, 0.2''=6mm, 0.3''=8mm, 0.4''=10mm, 0.5''=12mm. |
Grinding Dia. | ф0-100mm(0-3.94") |
Motor | 110V, 60 HZ, 1/3 HP, 2,800 RPM |
Taper Angle | 0°-180° |
Relief Angle | 0°-45° |
Negative Angle | 0°-26° |
Grinding Spindle | 5200r.p.m. |
Cup grinding wheel | 100x50x20mm(3.9*2.0*0.8") |
Net Weight | 99LB (45kg) |
Packing dim. | 55x65x47cm (21.7*25.6*18.5") |
Manufacturer/seller reserves the right to change any specifications without notice.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12433 - MOLDURADORA - 6 CABEZALES - LEADERMAC COMPACT 623
PARTE:
12433 - MOLDURADORA - 6 CABEZALES - LEADERMAC COMPACT 623USADA - BUENAS
CONDICIONESVoltage: 550/3/60CSA Hydro approvedHead Sequence: Bottom, Right Side, Near Side, 1st
Top, 2nd Top, 2nd Bottom9 1/16” x 6” CapacityInfeed Straightening Table -Sound EnclosureTotal H.P. 95.75 - Largest H.P. 20Total Amperage 107.2
40 mm Dia Spindles
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high
AMXmachinery
PARTE: 12581 – CHAFLANADORA - HAZELTHORN
PARTE: 12581 – CHAFLANADORA - HAZELTHORNUSADA – BUENAS CONDICIONES
AMXmachinery
PARTE: 12655-11 - ABRILLANTADORA RADIAL
PARTE: 12655-11
- ABRILLANTADORA RADIAL
USADA
PARA TERMINADOS PERFECTOS, ADAPTABLE A CUALQUIER TIPO
DE INDUSTRIA DEL MUEBLE
HACE EL TRABAJO QUE 6 PERSONAS HARIAN CON 6 REHILETES
PRECIO ACCESIBLE Y BAJO MANTENIMIENTO
ESPECIFICACIONES TECNICAS
LARGO MAXIMO DEL BRAZO
1550 MM