Identificador: 2536
Abierta
ID de articulo : # 2536 se ha agregado a su lista de deseos.
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2CK-MX340 - CANTEADORA DE CANTOS - 29 FPM - 0.4 - 3 MM
Capable of applying up to 3mm thick edge tape on cabinet parts and more. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who does not require pre-milling.
- Versatile edgebander capable of applying 0.4mm to 3mm edge tape.
- Quick change glue pot allows you to change glue colours in minutes.
- High frequency end trim & flush trim motors produce fine edge finishing results
- Multi-function trimmers allows for flush or radius trimming on edge banding
- Radius scraping removes any knife marks on radius edges
- Buffing unit polishes the edge
- Powerful chain feed system ensure work piece stability during application and processing of edge banding resulting in a high quality finish
- Teflon coated Quick Change glue pot can be removed and exchanged in only minutes. Comes with (1) quick change pot and others can be acquired for running different color glues.
- Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
- Conveyor chain feed system for reliable results
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800mm (31 ½”), for PVC/ABS
- Spring-loaded pressure unit with (2) pressure rollers
- Heavy-duty pressure beam with extendable workpiece support
- END TRIM
High frequency 12000 RPM end trimming unit, with Ø100mm (4”) TC-Saw blades - TOP & BOTTOM TRIM
High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming - RADIUS SCRAPING
Radius scraper with 2mm radius - BUFFING
3000 RPM top & bottom buffing units to polish the machined edge
Feeding motor | 1 HP | 0.75 (kW) |
Glue spindle motor | ¼ HP | 0.18 (kW) |
Front/rear trimming motor | 0.3 HP | 0.22 (kW) |
Upper trimming motor | ½ HP | 0.37 (kW) |
Lower trimming motor | ½ HP | 0.37 (kW) |
Upper buffing motor | 0.16 HP | 0.12 (kW) |
Lower buffing motor | 0.16 HP | 0.12 (kW) |
Pre-heating | ½ HP | 0.4 (kW) |
Glue pot | 1 ¾ HP | 1.315 (kW) |
INCH | METRIC | |
Feeding speed | 29 FPM | 9 meters/min. |
Panel thickness | 0.315”~1.77” | 8~45 mm |
Edge thickness | 0.0158”~0.118” | 0.4 ~ 3 mm |
Min. panel width | 4” | 100 mm |
Min. panel length | 6.7” | 170 mm |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA CINTA 24" - 2 EN 1- 5HP
SIERRA CINTA 24" - 2 EN 1- 5HP 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures...
-500x500.jpg)
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICA
PARTE:
2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICANueva con GarantiaIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX350M can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end tri...
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE HORIZONTAL
TALADRO MULTIPLE HORIZONTAL 2CK-BM301With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience...
-500x500.jpg)
AMXmachinery1
EXTRACTOR VENTILADOR TUBOAXIAL CON BASE
PARTE: 1AM - EXTRACTOR VENTILADOR TUBOAXIAL CON BASEPara uso de ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.Carcasa tubular fabricada en acero al carbón con aplicación de pintura electrostática y horneada. Rejilla de protección electro soldada. Hélice de aluminio anti-chispa.Características:– Aspa con diámetros de 16,20, 24 y 26″.– Volúmenes de aire desde 4,200 hasta 18,725 PCM.Usos:– Ventilación directa sobre maquin...