Identificador: 2537
Abierta
ID de articulo : # 2537 se ha agregado a su lista de deseos.
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILL
AMXmachinery1
Descripción
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILL
- Versatile edgebander capable of applying 0.4mm to 3mm edge tape.
- Quick change glue pot allows you to change glue colours in minutes.
- Couter rotating diamond premilling cutters produce optimum panel edge for superior edgebanding results
- High frequency end trim & flush trim motors produce fine edge finishing results
- Multi-function trimmers allows for flush or radius trimming on edge banding
- Radius scraping removes any knife marks on radius edges
- Buffing unit polishes the edge
- Powerful chain feed system ensure work piece stability during application and processing of edge banding resulting in a high quality finish
- Teflon coated Quick Change glue pot can be removed and exchanged in only minutes. Comes with (1) quick change pot and others can be acquired for running different color glues.
- Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
- Conveyor chain feed system for reliable results
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800mm (31 ½”), for PVC/ABS
- Spring-loaded pressure unit with (2) pressure rollers
- Heavy-duty pressure beam with extendable workpiece support
- PREMILLING UNIT
High-frequency pre-milling units can remove up to 3mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels
(2) counter-rotating diamond cutterheads for optimum results and longevity - END TRIM
High frequency 12000 RPM end trimming unit, with Ø100mm (4”) TC-Saw blades - TOP & BOTTOM TRIM
High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming - RADIUS SCRAPING
Radius scraper with 2mm radius - BUFFING
3000 RPM top & bottom buffing units to polish the machined edge
INCH | METRIC | |
Feeding speed | 29 FPM | 9 meters/min. |
Panel thickness | 0.315”~1.77” | 8~45 mm |
Max. pre-milling thickness | 1.77” | 45mm |
Edge thickness | 0.0158”~0.118” | |
Min. panel width | 4” | 100 mm |
Min. panel length | 6.7” | 170 mm |
Working table height | 33.5” | 850 mm |
Dust collection outlet | Ø 5” x 3 | Ø 127 mm x 3 |
Total connected power | 10 HP | 7.5 kW |
Machine dimensions (LxWxH) | 147” x 52” x 54” | 3700 x 1310 x 1380mm |
Machine weight | 1452 lbs | 660 kgs |
Shipping dimensions (LxWxH) | 91” x 29” x 54” | 2290 x 720 x 1370mm |
Shipping weight | 1558 lbs | 708 kgs |
Electrical requirement | 230/3/60: 40 amps | |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES RECTOS
PARTE: 4ST-FAST 500 MATRIX - SIERRA OPTIMIZADORA - CORTES RECTOSAUTOMATIC HIGH SPEED CROSSCUT SAW WITH ELECTRONIC PUSH-FEEDMATRIX, A STROMAB PHILOSOPHY Is a crosscut saw electronically pusher-controlled with complete optimisation and defection of wood.An optimal solution for all requirements in 90° up-cutting, it can work with either single bar and stack.Thanks to its specific cutting unit, it can perform a cutting cycle in 2 seconds and in relation to the cutting listcan produce up to 40% mor...
AMXmachinery1
ENGOMADORAS 1 Y 2 LADOS – CAPACIDAD ANCHO 12”
PARTE: 2TA-GS-12RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 12”
Nueva con garantíaRoller coaster type efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue for...
-500x500.png)
AMXmachinery1
TALADRO DOBLE FILA - 46 HUSILLOS
PARTE: 2RI-R46 - TALADRO DOBLE FILA - 46 HUSILLOSDescription:Iis ideal for cabinet and closet system panels requiring more than two rows of system holes for hardware functions. Drills two rows of shelf pin holes simultaneously. The fixed position top drilling heads provide rigid panel control for precise hardware system hole location. Single point panel referencing fence accurately locates all hardware system holes from the fence with the use of fence mounted stops and indexing pins. Linear be...
-500x500.png)
AMXmachinery1
ROLADORA 50'' x 14Ga
ROLADORA 50'' x 14Ga PARTE: 2GM-PSR-5014E-1PHPower Bending roll up/down with push buttonThis machine has a 2 HP Motor, rated at 220V, Single Phase. Min. roll bending dia.capacity 3.5" ISO 9001 certifiedBending roll is powered up/down with push button and LED display for repeat jobs and can make cone parts.One handle to control pinch roll up/down, more convenient and efficiencyHeavy welded all steel construction for maximum rigiditySilence electrical motorQuick release top roll...