Identificador: 2545
Abierta
ID de articulo : # 2545 se ha agregado a su lista de deseos.
Descripción
FINGER JOINT AUTOMATICA PARTE: 2CK-FL12
Represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for enduring reliability, ensuring consistent performance year after year. With its pioneering technology, this system delivers exceptional value, redefining industry standards in terms of both performance and return on investment, establishing itself as a constant catalyst for innovation in the wood industry.
- Excellent return on investment
- Fully automatic operation for short workpieces with high speed and throughput
- Only two operators are needed for maximum production
- Servo motor drive provides a production rate of up to 2~3 cycles/min
- Workpieces automatically travel between profiling and the gluing station
- As standard PVAc glue is used, but there are optional gluing systems for PUR, MUF, EPI, etc. available upon request
- Length of cut is calculated by an encoder and set on a touch screen for increased accuracy
- Designed for 2~300 mm (0.079~11.8”) wood length
- The three initial F-I01 hand feeding tables automatically carry workpieces, allowing for continuous infeed by operator
- The F-C31 finger shaper performs scoring, trimming, shaping, and gluing on both ends of the workpiece
- The workpieces feed directly onto the F-D01 automatic feeding table, where workpieces are automatically turned over from vertical to horizontal by a brush wheel
- Synchronized jointing and length cutting is performed in a 2-step process within the F-A08 Assembly Press– the standard jointing length is 14 feet
F-I02 Hand Feeding Table
DESCRIPTION | SPECIFICATION |
Automatic feeding table | 650 mm (25.6“) |
Feed drive motor | 1 HP x3 |
Machine dimensions (L x W x H) | 3190 x 870 x 970 mm (126 x 35 x 39“) |
Packing dimensions (L x W x H) | 3300 x 970 x 1070 mm (130 x 39 x 43“) |
F-D01-12 Automatic Feeding Table
DESCRIPTION | SPECIFICATION |
Automatic feeding table | 650 mm (25.6“) |
Range of material length | 150~1000 mm (5.9”~39.4“) |
Range of material width | 30~160 mm (1.2~6.3“) |
Motor | 1 HP |
Brush wheel drive motor | 1/8 HP |
Machine dimensions (L x W x H) | 1440 x 2660 x 1330 mm (57 x 105 x 53“) |
Packing dimensions (L x W x H) | 1540 x 2760 x 1430 mm (61 x 109 x 57“) |
F-C31 Automatic Finger Shaper – Right End
DESCRIPTION | SPECIFICATION |
Max. available width working table | 650 mm (25.6”) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA DOBLE - 45 GRADOS - 24 PULGADAS
PARTE: 2CK-PCM610Is a precision pneumatic saw designed for cutting miters up to 60o in either direction. The saw is automatically cycled pneumatically and activated by a foot switch to allow for fast positioning of the workpiece. Capable of production cutting with up to 40 cuts per minute. The cutting speed is adjustable to ensure the optimum finish result on your workpiece no matter the species or size. The rotary table runs on ball bearings to ensure effortless rotation of the blade ...
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...
AMXmachinery1
ASTILLADORA - HORIZONTAL - 15 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-1504HC - ASTILLADORA - HORIZONTAL - 15 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cuttin...
AMXmachinery1
CIERRA CINTA 24"
CIERRA CINTA 24" PARTE: 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple desig...