Identificador: 2573
Abierta
ID de articulo : # 2573 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2GM-GML-32120 - TORNO 32 x 120''
Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor.
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
- Free SINO DRO, installed
- Free Taper turning attachment, , installed
- 12” 3-jaw chuck with top reversible jaws
- 16” 4-jaw chuck
- 20” Face plate
- 10” drive plate
- ¾”-7-1/2” steady rest with roller jaws
- 1”-5” follow rest
- Removable gap
- 4-way tools post
- Foot brake
- Halogen Work light
- coolant system
- Full length rear splash
- (2) dead centers and (1) reducing sleeve
- Thread chasing dial
- Tool box and leveling pads
Max. swing over bed | 32” |
Max. length of workpiece | 120” |
Max. swing over cross slide |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
FINGER JOINT - AUTOMATICO
PARTE: 2CK-FL-08 - FINGER JOINT - AUTOMATICOAUTO INFEED
TABLE
Length
900mm (35.4”)
Width
600mm (23.6”)
Infeed
Table½ HP (3Ph) x 2
AUTO FINGER SHAPER – LEFT
Table Size
600mm (23.6”)
Length
150~900mm (5.9” ~ 35.4”)
Width
20~60mm (0.78” ~ 2.36”)
Thickness
20~160mm (0.78” ~ 6.3”)
...
-500x500.png)
AMXmachinery1
POLIPASTO - 2 TONS
PARTE: 12734 - POLIPASTO - 2 TONSCapacity (tons): 2Capacity (lb): 4000Lift Travel (feet): 20'Lift Speed (feet per minute): 26Volts: 230/460Phase: 3 PhaseMotor Horse Power: 4Hoist Duty Class: H4Lifting Medium: Link ChainMinimum Distance Between Hooks (inches): 38"Pendant/Control Length From Bottom of Hoist (ft): 17'Length of Hoist power supply cord (ft): 2'Industrial electric chain hoistEquipped with chain container and pendant controlLoad Tested and works as it should.
AMXmachinery1
EXTRACTOR DE POLVOS - FILTRO - CALCETIN
PARTE: 2EX-DC-0170015 - EXTRACTOR DE POLVOS - FILTRO - CALCETIN
-500x500.png)
AMXmachinery1
SIERRA DE PANELES MANUAL
PARTE. 3HO-HT1600 - SIERRA DE PANELES MANUALOne motor drives two saw discsSliding Table Dimension1600*240mmMain Blade Diameterφ300*30mmMain Blade Speed4000rpmScoring Blade Diameterφ120*20mmScoring Blade Speed5800rpmMotor Power3kw,(220v)Max. Cutting Height100mm(90 °)70mm(45 °)Blade Tilting Adjustment0-45°