Identificador: 2573
Abierta
.PNG)
Descripción
TORNO 32 x 120'' PARTE: 2GM-GML-32120
Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor.
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
- Free SINO DRO, installed
- Free Taper turning attachment, , installed
- 12” 3-jaw chuck with top reversible jaws
- 16” 4-jaw chuck
- 20” Face plate
- 10” drive plate
- ¾”-7-1/2” steady rest with roller jaws
- 1”-5” follow rest
- Removable gap
- 4-way tools post
- Foot brake
- Halogen Work light
- coolant system
- Full length rear splash
- (2) dead centers and (1) reducing sleeve
- Thread chasing dial
- Tool box and leveling pads
Max. swing over bed | 32” |
Max. length of workpiece | 120” |
Max. swing over cross slide |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CORTADORA DE METAL ESTILO GANG
CORTADORA DE METAL ESTILO GANG PARTE: 2GM-PS-4816GT48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phasewith NC programmable cut to length, 5” touch screenISO 9001 certifiedAmerican design and Taiwan quality machineSlit and cut to length in one unitNC programmable cutting length, 100 job memory featureSingle cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.Auto cycle mode-shearing will auto cycle the programmed cut lengt...
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P630HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...
-500x500.png)
AMXmachinery1
CORTADORA DE CHAPA 10 GA X 47''
CORTADORA DE CHAPA 10 GA X 47'' PARTE: 2GM-PS-16Our multi-functional metal slitter can shear, and bead sheet metal. Suitable for cutting up to 16 gauge mild steel by 47 inch material. This robust metal slitter comes equipped with a 2HP motor, slitting dies, a quick change back gauge, and a convenient foot pedal for safety and easy operation. The slitter sits on a heavy duty cabinet stand which can balance the weight of the machine well with no wobble. ISO 90...
AMXmachinery1
TALADRADORA HORIZONTAL
TALADRADORA HORIZONTAL PARTE: 2CK-BM301With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience. The drilling spe...