Identificador: 2581
Abierta
ID de articulo : # 2581 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
PARTE: 2GM-EPS-0810M - GUILLOTINA MECANICA - 8 PIES LARGO X 10 GA
AMXmachinery1
Descripción
PARTE: 2GM-EPS-0810M - GUILLOTINA MECANICA - 8 PIES LARGO X 10 GA
Shop our 8 foot mechanical shears that are capable of cutting up to 10 gauge mild steel and 14 gauge stainless. Our sheering machines are designed as a low maintenance design with an array of features that will add value to any machine shop.
- ISO 9001 certified
- American design and Taiwan quality machine
- HD all steel construction for maximum rigidity
- Precision driven gearbox
- Full length 30 strokes per minute
- 60” long squaring arm with inch / mm scale
- spring hold-downs
- high grade carbon/chrome alloy steel blades and hardened to 62 hrc,
2-edge indexable upper blade and 4-edge indexable bottom blade
- Full length with full view finger guard
- Front supports and (2) side gauges
- Safety type foot pedal control
- Jog, single continuous auto operation modes
- 26” manual back gauge with one side handwheel
- 60” long squaring arm with inch / mm scale, mounted on right side of the table
- 2 each 24” front support arms
- full length finger guard
- Removable safety foot pedal control
- One set of upper & lower blades
Cutting Capacity Mild Steel - HRS (tensile 60,000 PSI) Stainless Steel (tensile 85,000 PSI) Soft Aluminum (tensile 28,000 PSI) min. thickness |
8' x 10Ga. 8' x 14Ga. 8' x 1/4" 22Ga. |
| Blade Lenght | 98" |
| Strokes per minute | 26 |
| Worktable height | 32" |
| Front support arm | 36" |
Back gauge | 26" Manual Back gauge |
Blade Rake Angle | 2.5 Degree |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE - 21 CABEZALES
PARTE: 2CK-HS21T - TALADRO MULTIPLE - 21 CABEZALESIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions. Has a robust fabricated steel construction with precision machined cast iron table. The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM. Each spindle is equipped wit...
AMXmachinery1
COLECTOR DE POLVOS MODULAR - 20 HP
PARTE: 2EX- DC-3200S - COLECTOR DE POLVOS MODULAR - 20 HPIs powered by a 20 horsepower motor and comes equipped with 4 1-micron filter bags. It features a 132 square foot filter area with 48 cubic feet of storage capacity measuring 112 inches tall by 156 inches wide by 50 inches deep. This three-phase dust collector has 37 amps at 220 volts with 1725 RPM on a 26 inch fan. Modular ring design enables increased storage and filter capacity. Magnetic starter included.
AMXmachinery1
ENGOMADORA DE 1 Y 2 LADOS
PARTE: 3HO-MT6106 - ENGOMADORA DE 1 Y 2 LADOSModel123Max.Spreading Width600mm800mm1300mmMax. Working Thickness60mm60mm60mmGlue Roller Diameter200mm200mm215mmGlue Spreading Speed22m/min22m/min22m/minMotor Power1.5kw2.2kw2.2kwOverall Dimension(mm)1400*800*13001600*800*13002000*800*1300Glue Spreading Sidesingle side, double sides gluing is optional
-500x500.jpg)
AMXmachinery1
ASTILLADORA - VERTICAL - 47 X 51 PULGADAS
PARTE: 2LO-WG-4751V - ASTILLADORA - VERTICAL - 47 X 51 PULGADASFeatures:A specially designed with push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows ag...