Identificador: 2586
Abierta
ID de articulo : # 2586 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2GM-HBB-1010NC - ENGANCHADORA CON CONTROLADOR NC
- Meet OSHA and CE safety standard
- 48” NC table back gauge with fingers
- Max. 16 bends per program
- Upto 100 Program Storage
- Programmable Angle/ Angle Correct
- NC ram height control for open hemming
- Hardened fingers and table
- Germany Rexroth hydraulic system
- Yaskawa Servo motors and Drives
- Schneider electrical components
- All steel construction for maximum rigidity
- Hydraulic logic system centrally located and quiet
- Safety type foot pedal with handle and E-stop switch
- Safety 24V low voltage & overload protection
Capacity: Mild Steel(hot roll)60K PSI Stainless Steel 85 K PSI Soft aluminum 28K PSI Hemming max thickness: |
10 Ga. 14 Ga. 1/4" 22 Ga. |
| Bending length capacity | 10' |
| Bend Angel Degree, programmable | 135 degree |
| Max. Box Depth | 153mm=6.02” |
| Large Beam Opening/Clamping Opening | 3" |
| Beam front/back adjustment | 1" |
| Min. Reverse Bend | 1" |
Max. Table Back Gauge Distance Min. Table Back Gauge Distance | 48-3/8" 1/4" |
| Back Gauge Repeatability | 0.0039" |
| Back Gauge Table Height | 35-3/4" |
| Assorted fingers | 3" 4" 5" 6" |
Main Motor
Servo Motor for back gauge |
10HP,220V/208V, 3ph (35amps)
1HP |
Hydraulic Oil Tank Capacity: Recommended hydraulic oil: | 32 Gal. Shell #68 or equivalent |
Machine Weight: Shipping weight: Machine Dimensions: Shipping Dimensions: | 11,550 lbs. 11,850 lbs. 175" x 93" x 76" 163" x 85" x 78" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 15 HP
PARTE: 2CK-DBS15 - COLECTOR DE POLVOS - 15 HP Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood was...
-500x500.png)
AMXmachinery1
CORTADORA 4 PIES
PARTE: 2GM-EPS-0412M-1PH - CORTADORA 4 PIES Shop our 4 foot mechanical shears that are capable of cutting up to 12 gauge mild steel and 16 gauge stainless. Our sheering machines are designed as a low maintenance design with an array of features that will add value to any machine shop. ISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squa...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
AMXmachinery1
SIERRA MULTIPLE - 16"
PARTE: 2CK-MRS350 - SIERRA MULTIPLE - 16"FEATURESThe Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpillar feeding with Heavy Guided Chain. Chain blocks are special cast iron with heat treated & precision ground pinsNickel chrome steel 55mm dia. Saw Arbor with 70 mm OD with dble. keyed Quick Removal SleevePowered Rise & Fall to the Pressure RollersNew style round Fence Bar support with Quick-Shift Long FenceLong Infeed Fence with...